Microstructural Development and Mechanical Properties for Reactive Air Brazing of ZTA to Ni Alloys Using AgCuO Braze Alloys

• Published in: Advanced engineering materials Vol. 16; no. 12; pp. 1448 - 1455
• Main Authors: Prevost, Erica, DeMarco, A. Joseph, MacMichael, Beth, Joshi, Vineet V., Meier, Alan, Hoffman, John W., Walker, William J.
• Format: Journal Article
• Language: English
• Published: Blackwell Publishing Ltd 01.12.2014
• Subjects: Alloys; Brazed joints; Brazing; COPPER OXIDE; Glass; GLASSES; JOINTS; MECHANICAL PROPERTIES; MICROSTRUCTURES; NICKEL ALLOYS (50 TO 99 NI); Nickel base alloys; OXIDES; Strength; Zirconium dioxide
• ISSN: 1438-1656; 1527-2648
• DOI: 10.1002/adem.201400140

In the current study, nickel (Ni) alloys were heat treated to form an oxide layer prior to reactive air brazing (RAB) joining to zirconia‐toughened alumina (ZTA). In the current study five Ni alloys were evaluated. The ZTA studied had compositions of 0–15 wt% zirconia and 0–14 wt% glass. Four point‐bend tests were performed to evaluate the joint strength of ZTA/ZTA and ZTA/nickel alloys brazed with Ag 2 wt% CuO braze alloys. The joint strength is not a function of the ZTA composition, but the strength is a strong function of the chemistry and microstructure of the oxide layer formed on the nickel alloy. An increase in the aluminum content of the Ni alloy resulted in an increase of the thickness of alumina in the oxide layer and was directly proportional to the bond strength. Joint fracture strengths of Ni alloys brazed with ZTA containing 0 wt% zirconia and 10 wt% glass, 7.5 wt% zirconia and 10 wt% glass and 7.5 wt% zirconia and 6 wt% glass where it is observed that the fracture occurred on the Ni alloy side of the braze indicating that the ZTA has no effect on the joint strength for this geometry.