Investigation of Strength Recovery in Welds of NUCu-140 Steel Through Multipass Welding and Isothermal Post-Weld Heat Treatments

• Published in: Metallurgical and materials transactions. A, Physical metallurgy and materials science Vol. 46; no. 11; pp. 5158 - 5170
• Main Authors: Bono, Jason T., DuPont, John N., Jain, Divya, Baik, Sung-Il, Seidman, David N.
• Format: Journal Article
• Language: English
• Published: New York Springer US 01.11.2015; Springer Nature B.V
• Subjects: Characterization and Evaluation of Materials; Chemistry and Materials Science; Copper; Ferritic stainless steels; Heat; Heat affected zone; Materials Science; Metallic Materials; Nanotechnology; Post-weld heat treatment; Precipitates; Precipitation; Recovering; Simulation; Strength; Structural Materials; Studies; Surfaces and Interfaces; Thin Films; Welded joints; Welding; Atom Probe Tomography; Fusion Zone; Weld Thermal Cycle; Base Metal; PWHT
• ISSN: 1073-5623; 1543-1940
• DOI: 10.1007/s11661-015-3087-x

NUCu-140 is a ferritic copper precipitation-strengthened steel that is a candidate material for use in many naval and structural applications. Previous work has shown that the heat-affected zone (HAZ) and fusion zone (FZ) of NUCu-140 exhibit softening that is due to dissolution of the copper-rich precipitates. This study aims to recover the FZ and HAZ strength by re-precipitation of the copper-rich precipitates through either multiple weld passes or an isothermal post-weld heat treatment (PWHT). The potential use of multiple thermal cycles was investigated with HAZ simulations using a Gleeble thermo-mechanical simulator. The HAZ simulations represented two weld thermal cycles with different combinations of peak temperatures during the initial and secondary weld passes. To investigate the potential for a PWHT for strength recovery, gas tungsten arc weld samples were isothermally heated for various times and temperatures. Microhardness measurements revealed no strength recovery in the multipass HAZ samples. The time-dependent precipitate characteristics were modeled under the HAZ thermal cycle conditions, and the results showed that the lack of strength recovery could be attributed to insufficient time for re-precipitation during the secondary weld pass. Conversely, full strength recovery in the HAZ was observed in the isothermally heat treated samples. Atom probe tomography analysis correlated this strength recovery to re-precipitation of the copper-rich precipitates during the isothermal PWHT.