Microstructure and Corrosion Behavior of Sn–Zn Alloys

• Published in: Materials Vol. 15; no. 20; p. 7210
• Main Authors: Gerhátová, Žaneta, Babincová, Paulína, Drienovský, Marián, Pašák, Matej, Černičková, Ivona, Ďuriška, Libor, Havlík, Róbert, Palcut, Marián
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 16.10.2022; MDPI
• Subjects: Alloys; Argon; Binary alloys; Cathodic protection; Chemical composition; corrosion; Corrosion and anti-corrosives; Corrosion mechanisms; Corrosion potential; Corrosion products; Corrosion rate; Corrosion resistance; electrochemical potentiodynamic corrosion test; Electrodes; Eutectic alloys; Hydrogen chloride; Induction melting; Mechanical properties; Microstructure; Radiation; Room temperature; Sn–Zn alloys; Sodium chloride; Spallation; Specialty metals industry; Tin base alloys; Zinc base alloys; United Kingdom > UK; Czech Republic
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma15207210

In the present work, the microstructure, phase constitution, and corrosion behavior of binary Sn–xZn alloys (x = 5, 9 and 15 wt.%) were investigated. The alloys were prepared by induction melting of Sn and Zn lumps in argon. After melting, the alloys were solidified to form cast cylinders. The Sn–9Zn alloy had a eutectic microstructure. The Sn–5Zn and Sn–15Zn alloys were composed of dendritic (Sn) or (Zn) and eutectic. The corrosion behavior of the Sn–Zn alloys was studied in aqueous HCl (1 wt.%) and NaCl (3.5 wt.%) solutions at room temperature. Corrosion potentials and corrosion rates in HCl were significantly higher compared to NaCl. The corrosion of the binary Sn–Zn alloys was found to take place by a galvanic mechanism. The chemical composition of the corrosion products formed on the Sn–Zn alloys changed with the Zn weight fraction. Alloys with a higher concentration of Zn (Sn–9Zn, Sn–15Zn) formed corrosion products rich in Zn. The Zn-rich corrosion products were prone to spallation. The corrosion rate in the HCl solution decreased with decreasing weight fraction of Zn. The Sn–5Zn alloy had the lowest corrosion rate. The corrosion resistance in HCl could be considerably improved by reducing the proportion of zinc in Sn–Zn alloys.