Combining Surface Treatments With Shallow Slots to Improve the Spatial Resolution Performance of Continuous, Thick LYSO Detectors for PET

• Published in: IEEE transactions on nuclear science Vol. 60; no. 1; pp. 44 - 52
• Main Authors: Kaul, M., Surti, S., Karp, J. S.
• Format: Journal Article
• Language: English
• Published: United States IEEE 01.02.2013
• Subjects: Anodes; Continuous crystals; Crystals; depth of interaction (DOI); Detectors; maximum likelihood positioning; Positron emission tomography; positron emission tomography (PET); slotted LYSO; Spatial resolution; Surface treatment; Thickness measurement
• ISSN: 0018-9499; 1558-1578
• DOI: 10.1109/TNS.2013.2240315

Positron emission tomography (PET) detectors based on continuous scintillation crystals can achieve very good performance and have a number of practical advantages compared to detectors based on a pixelated array of crystals. Our goal is to develop a thick continuous detector with high energy and spatial resolution, along with high γ -photon capture efficiency. We examine the performance of two crystal blocks: a 46 × 46 × 14 mm 3 and a 48×48×25 mm 3 block of LYSO (Lutetium Yttrium Orthosilicate). Using Maximum Likelihood (ML) positioning based upon the light response function (LRF) in the 14 mm thick crystal, we measure a spatial resolution of 3 mm in the central region of the crystal with degradation near the edges due to reflections off the crystal sides. We also show that we can match the spatial resolution achieved using a 14 mm thick crystal by using a 25 mm thick crystal with slots cut into the gamma entrance surface to narrow the LRF. We also find that we can improve the spatial resolution performance near the detector edges by reducing the reflectivity of the crystal sides, albeit with some loss in energy resolution.