Effect of notches on creep–fatigue behavior of a P/M nickel-based superalloy

• Published in: International journal of fatigue Vol. 87; pp. 311 - 325
• Main Authors: Telesman, J., Gabb, T.P., Ghosn, L.J., Gayda, J.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.06.2016
• Subjects: Creep (materials); Creep–fatigue; Dwell; Dwell notch low cycle fatigue; Environmental degradation; Hydrostatic stress; Nickel base alloys; Notches; Roots; Strengthening; Stresses; Superalloys; Dwell notch low cycle fatigue; Superalloys; Environmental degradation; Hydrostatic stress; Creep–fatigue
• ISSN: 0142-1123; 1879-3452
• DOI: 10.1016/j.ijfatigue.2016.01.024

•Cyclic dwells at minimum stress result in shorter lives than at maximum stress.•Cyclic min dwell notch LCF debit due to surface environmental embrittlement.•Crack initiation location shifts away from the notch for cyclic max dwells.•Cyclic maximum dwell NLCF life controlled by creep – not by fatigue.•Drucker–Prager based hydrostatic stress profile explains experimental results. A study was performed to determine and model the effect of high temperature dwells on notch low cycle fatigue (NLCF) and notch stress rupture behavior of a fine grain LSHR powder metallurgy (P/M) nickel-based superalloy. It was shown that a 90second (s) dwell applied at the minimum stress (“min dwell”) was considerably more detrimental to the NLCF lives than similar dwell applied at the maximum stress (“max dwell”). The short min dwell NLCF lives were shown to be caused by growth of small oxide blisters which caused preferential cracking when coupled with high concentrated notch root stresses. The cyclic max dwell notch tests failed mostly by creep accumulation, not by fatigue, with the crack origin shifting internally to a substantial distance away from the notch root. The classical von Mises plastic flow model was unable to match the experimental results while the hydrostatic stress profile generated using the Drucker–Prager plasticity flow model was consistent with the experimental findings. The max dwell NLCF and notch stress rupture tests exhibited substantial creep notch strengthening. The triaxial Bridgman effective stress parameter was able to account, with some limitations, for the notch strengthening by collapsing the notch and uniform gage geometry test data into a singular grouping.