Studies on the adsorption of Pb(II) from aqueous solutions using sugarcane bagasse-based modified activated carbon with nitric acid: Kinetic, isotherm and desorption

• Published in: Chemical physics impact Vol. 6; p. 100181
• Main Authors: Somyanonthanakun, Wuttichai, Ahmed, Ramzan, Krongtong, Viyaporn, Thongmee, Sirikanjana
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01.06.2023; Elsevier
• Subjects: Adsorption isotherm; Lead removal; Modification activated carbon; Sugarcane bagasse; Lead removal; Modification activated carbon; Adsorption isotherm; Sugarcane bagasse
• ISSN: 2667-0224; 2667-0224
• DOI: 10.1016/j.chphi.2023.100181

Activated carbon (AC) made from sugarcane bagasse (SB) was modified by nitric acid (HNO3) oxidation, to investigate whether this enhanced its capacity for lead (Pb) removal. The modified ACs were characterized by scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) and Fourier transform infrared (FTIR) spectroscopy. The micrographs showed the modified AC samples looked clean, but the surface had eroded, resulting in pore blockage in the micropores. However, the results showed that an increase in nitric acid concentration resulted in a significant decrease in specific surface area after modification. The experimental results indicated that nitric acid modification increased the oxygen-containing functional groups (i.e., hydroxyl, carboxyl, carbonyl, and ester) on the adsorbent surfaces. The presence of surface functional groups influenced the samples' adsorption capacity for heavy metal ion (Pb(II) removal from an aqueous solution. The maximum Pb(II) adsorption capacity, according to the Langmuir model, was around 212.31 mg g−1. Kinetic studies were evaluated by pseudo-first-order and pseudo-second-order models to describe the possible Pb(II) adsorption mechanism, that demonstrated a faster adsorption rate on the adsorbent, and the pseudo-second-order model fitted well for all of the samples. A possible adsorption mechanism could be the ion exchange of functional groups in surface complexation with the heavy metal ions. In summary, modified AC from SB is a novel, useful, and potentially economical adsorbent, with the capacity to efficiently remove metal ions from aqueous solutions, thus offering a potential solution to the growing problem of agricultural waste disposal. [Display omitted] The effect of initial pH on the removal of Pb(II) ions from samples. C0 = 400 mg L-1 (50 mL), adsorbent dose = 0.1 g, and agitation speed 180 rpm (120 min).