Effect of temperature history during additive manufacturing on crystalline morphology of PEEK

• Published in: Advances in industrial and manufacturing engineering Vol. 4; p. 100085
• Main Authors: Lee, Austin, Wynn, Mathew, Quigley, Liam, Salviato, Marco, Zobeiry, Navid
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01.05.2022; Elsevier
• Subjects: Additive manufacturing simulation; Crystallinity; Fused deposition modeling; PEEK; Polarized microscopy; Semi-crystalline thermoplastics; Semi-crystalline thermoplastics; Polarized microscopy; Fused deposition modeling; Crystallinity; Additive manufacturing simulation; PEEK
• ISSN: 2666-9129; 2666-9129
• DOI: 10.1016/j.aime.2022.100085

Additive manufacturing parameters of high-performance polymers greatly affect the thermal history and consequently quality of the end-part. For fused deposition modeling (FDM), this may include printing speed, filament size, nozzle, and chamber temperatures, as well as build plate temperature. In this study, the effect of thermal convection inside a commercial 3D printer on thermal history and crystalline morphology of polyetheretherketone (PEEK) was investigated using a combined experimental and numerical approach. Using digital scanning calorimetry (DSC) and polarized optical microscopy (POM), crystallinity of PEEK samples was studied as a function of thermal history. In addition, using finite element (FE) simulations of heat transfer, which were calibrated using thermocouple measurements, thermal history of parts during virtual 3D printing was evaluated. By correlating the experimental and numerical results, the effect of printing parameters and convection on thermal history and PEEK crystalline morphology was established. It was found that the high melting temperature of PEEK, results in fast melt cooling rates followed by short annealing times during printing, leading to relatively low degree of crystallinity (DOC) and small crystalline morphology.