Ru/Attapulgite as an Efficient and Low-Cost Ammonia Decomposition Catalyst

• Published in: Catalysts Vol. 14; no. 3; p. 197
• Main Authors: Teng, Qingfeng, Sang, Junkang, Chen, Guoxin, Tao, Haoliang, Wang, Yunan, Li, Hua, Guan, Wanbing, Ding, Changsheng, Liu, Fenghua, Zhu, Liangzhu
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.03.2024
• Subjects: Ammonia; ammonia decomposition; attapulgite; Carbon; Catalysts; Chemical properties; Crystal structure; Decomposition; Decomposition (Chemistry); Efficiency; Fuel cells; Hydrogen; Hydrogen production; Identification and classification; Low cost; Metal catalysts; Methods; Mineral fibers; Minerals; Nanoparticles; palygorskite; Precious metals; Roasting; Ru/ATP; Temperature; China
• ISSN: 2073-4344; 2073-4344
• DOI: 10.3390/catal14030197

On-site hydrogen generation from ammonia decomposition is a promising technology to address the challenges of direct transportation and storage of hydrogen. The main problems with the existing support materials for ammonia decomposition catalysts are their high cost and time-consuming preparation process. In this work, ammonia decomposition catalysts consisting of in situ-formed nano-Ru particles supported on a naturally abundant mineral fiber, attapulgite (ATP), were proposed and studied. Also, 1 wt.% Ru was uniformly dispersed and anchored onto the surface of ATP fibers via the chemical method. We found that the calcination temperatures of the ATP support before the deposition of Ru resulted in little difference in catalytic performance, while the calcination temperatures of the 1Ru/ATP precursor were found to significantly influence the catalytic performance. The prepared 1 wt.% Ru/ATP catalyst (1Ru/ATP) without calcination achieved an ammonia conversion efficiency of 51% at 500 °C and nearly 100% at 600 °C, with the flow rate of NH3 being 10 sccm (standard cubic centimeter per minute). A 150 h continuous test at 600 °C showed that the 1Ru/ATP catalyst exhibited good stability with a degradation rate of about 0.01% h−1. The 1Ru/ATP catalyst was integrated with proton ceramic fuel cells (PCFCs). We reported that PCFCs at 650 °C offered 433 mW cm−2 under H2 fuel and 398 mW cm−2 under cracked NH3 fuel. The overall results suggest low-level Ru-loaded ATP could be an attractive, low-cost, and efficient ammonia decomposition catalyst for hydrogen production.