A Novel Experimental Approach to the Applicability of High-Sensitivity Giant Magneto-Impedance Sensors in Magnetic Field Communication

• Published in: IEEE access Vol. 8; pp. 193091 - 193101
• Main Authors: Kim, Jang-Yeol, Cho, In-Kui, Lee, Hyun Joon, Lee, Jaewoo, Moon, Jung-Ick, Kim, Seong-Min, Kim, Sang-Won, Ahn, Seungyoung, Kim, Kibeom
• Format: Journal Article
• Language: English
• Published: Piscataway IEEE 2020; The Institute of Electrical and Electronics Engineers, Inc. (IEEE)
• Subjects: Aluminum oxide; Amorphous microwire; Bandwidths; Channel capacity; Circuit boards; Coils (windings); Communication; Density; Equivalence; giant magneto-impedance (GMI); Giant magnetoimpedance; high sensitivity; Impedance; Insulation; magnetic field communication; Magnetic fields; magnetic sensor; Magnetic sensors; Magnetometers; Mass production; Mechanical systems; Mixers; Perpendicular magnetic anisotropy; Pickup coils; Printed circuits; Sensitivity; Sensor phenomena and characterization; Sensors; Solenoids; Substrates
• ISSN: 2169-3536; 2169-3536
• DOI: 10.1109/ACCESS.2020.3032702

This article presents a new application field of a giant magneto-impedance (GMI) sensor. It shows valuable findings for the GMI sensor on the possibility of a new receiving element in magnetic field communication. The proposed GMI sensors serve as antennas and mixers in receiver systems. They have the advantage of being easily implemented and in terms of mass production and manufacturing processes due to the manufacture base on a printed circuit board (PCB). Their smaller size, lower cost, and higher sensitivity have more advantages than conventional magnetic sensors, such as the magneto-inductive, anisotropic magneto-resistive, and giant magneto-resistive sensors. Two types of PCB-based GMI sensors are proposed. The first type of GMI sensor is directly wound around the solenoid-shaped pickup coil onto an alumina insulation tube inserted with an amorphous microwire. The second type of GMI sensor has a patterned pickup coil that does not require the winding of the coil, similar to the patterned pickup coil of a micro electro-mechanical system-based GMI sensor. This GMI sensor provides a new geometry that can be easily manufactured with two PCB substrates. The proposed GMI sensors achieve the equivalent magnetic noise spectral density to the high-sensitivity characteristics of the pT/<inline-formula> <tex-math notation="LaTeX">\surd </tex-math></inline-formula>Hz level. The equivalent magnetic noise spectral density of 1.5 pT/<inline-formula> <tex-math notation="LaTeX">\surd </tex-math></inline-formula>Hz at 20.03 MHz is obtained for the first type of GMI sensor, and 3 pT/<inline-formula> <tex-math notation="LaTeX">\surd </tex-math></inline-formula>Hz at 3.03 MHz is achieved the second type. The analyzed results of the bandwidth and the channel capacity for the two types of GMI sensors are acceptable. This first analysis confirms the possibility of the implementation of GMI sensors in magnetic field communication. The results of this experiment confirm the high performance of the proposed GMI sensors and their applicability in magnetic field communication. The detailed experimental results of the proposed GMI sensors are presented and discussed.