Development of mono-component and tri-component fibres 100% polymer based piezoelectric PVDF to harvest energy

• Published in: IOP conference series. Materials Science and Engineering Vol. 254; no. 7; pp. 72026 - 72031
• Main Authors: Talbourdet, A, Rault, F, Cayla, A, Cochrane, C, Devaux, E, Gonthier, A, Lemort, G, Campagne, C
• Format: Journal Article
• Language: English
• Published: Bristol IOP Publishing 01.10.2017
• Subjects: Beta phase; Conducting polymers; Electric potential; Energy harvesting; Filaments; Melt spinning; Piezoelectricity; Polyvinylidene fluorides; Voltage
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/254/7/072026

A first study focused on the realization of a 100% Polyvinylidene fluoride woven fabric. The multi-filaments produced by melt spinning and studied by FTIR, X-Ray and DSC, were optimized in the β-phase, 97%, thanks drawing ratio of λ=5, and the processing temperature, 90°C. When the polar β-phase achieves a certain level in PVDF, the woven material is poling with fields up to about 6kV. DMA tests coupled to a Keithley voltmeter allow the solicitation of PVDF fabrics. A variation of voltage is obtained in compression, with a maximum output voltage of up to 2,3V. The other part of the study explains premises of a tricomponent fibre development, PEHD/PVDF/PA12. Two layers of conductive polymers acting as electrodes are placed on either side of the PVDF layer. The interfacial adhesion between the three different layers is analysed by SEM. The maximum stretch on melt spinning was fixed at 2.5 and the β-phase of the PVDF measured by X-Ray.