The Effect of Heat Treatment on the Sensitized Corrosion of the 5383-H116 Al-Mg Alloy

• Published in: Materials Vol. 10; no. 3; p. 275
• Main Authors: Lin, Ying-Kai, Wang, Shing-Hai, Chen, Ren-Yu, Hsieh, Tso-Sheng, Tsai, Liren, Chiang, Chia-Chin
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 09.03.2017; MDPI
• Subjects: Aluminum base alloys; Beta phase; Conductivity; Corrosion; Corrosion effects; Dislocation density; Grain boundaries; Heat treating; Heat treatment; Intergranular corrosion; Recrystallization; 5383-H116 Al-Mg alloy; β phase-Al3Mg2; NAMLT; sensitization
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma10030275

In this study, the effects of heat treatment and sensitized corrosion on the 5383-H116 Al-Mg alloy were investigated for temperatures ranging from 100 to 450 °C. The results show that the heat treatment temperature is the main factor that causes changes to the microstructure and mechanical strength of the 5383-H116 Al-Mg alloy, inducing β-phase (Al3Mg2) precipitation in the form of a continuous layer along the grain boundaries. Intergranular corrosion was caused by the β-phase of the grain boundary precipitation, and the corrosion susceptibility of the recrystallized structure was significantly higher than the corrosion susceptibility of the recovered structure. According to the conductivity values detected, β-phase precipitation can enhance the 5383-H116 Al-Mg alloy conductivity, with the response due to structural dislocation density being higher than that due to the recrystallized structure. As such, the β-phase precipitation after sensitization is more significant than the β-phase precipitation prior to the sensitization, such that after sensitization, the conductivity rises to a significantly higher level than that exhibited by the recrystallization structure.