A Strain-Transfer Model of Surface-Bonded Sapphire-Derived Fiber Bragg Grating Sensors

• Published in: Applied sciences Vol. 10; no. 12; p. 4399
• Main Authors: Zhang, Penghao, Zhang, Li, Wang, Zhongyu, Chen, Shuang, Shang, Zhendong
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.06.2020
• Subjects: Adhesives; Alumina; alumina content; Aluminum oxide; Bragg grating; Bragg gratings; Cladding; core radius; Diffraction gratings; Fiber optics; Interfaces; Linear energy transfer; Materials; Mathematical models; Mechanical properties; Modulus of elasticity; Sapphire; sapphire-derived fiber; Sensors; Shear deformation; Shear strain; Shear stress; Silicon-on-sapphire; strain transfer; Strains and stresses; Stress relaxation (Materials); Stress relieving (Materials); China
• ISSN: 2076-3417; 2076-3417
• DOI: 10.3390/app10124399

An improved strain-transfer model was developed for surface-bonded sapphire-derived fiber Bragg grating sensors. In the model, the core and cladding of the fiber are separated into individual layers, unlike in conventional treatment that regards the fiber as a unitive structure. The separation is because large shear deformation occurs in the cladding when the core of the sapphire-derived fiber is heavily doped with alumina, a material with a high Young’s modulus. Thus, the model was established to have four layers, namely, a core, a cladding, an adhesive, and a host material. A three-layer model could also be obtained from the regressed four-layer model when the core’s radius increased to that of the cladding, which treated the fiber as if it were still homogeneous material. The accuracy of both the four- and three-layer models was verified using a finite-element model and a tensile-strain experiment. Experiment results indicated that a larger core diameter and a higher alumina content resulted in a lower average strain-transfer rate. Error percentages were less than 1.8% when the four- and three-layer models were used to predict the transfer rates of sensors with high and low alumina content, respectively.