Polyurethane Composites Recycling with Styrene-Acrylonitrile and Calcium Carbonate Recovery

• Published in: Materials Vol. 17; no. 12; p. 2844
• Main Authors: Del Amo, Jesús, Iswar, Subramaniam, Vanbergen, Thomas, Borreguero, Ana Maria, De Vos, Simon Dirk E, Verlent, Isabel, Willems, Jan, Rodriguez Romero, Juan Francisco
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 11.06.2024; MDPI
• Subjects: Acrylonitrile; Calcium carbonate; Catalysts; Consumption; Fillers; flexible polyurethane foams; Glycolysis; Isocyanates; Mechanical properties; physical and mechanical properties; Plastic foam; Polyols; polyurethane composites; Polyurethane foam; Polyurethanes; Silicones; Styrenes; styrene–acrylonitrile; Synthesis; Belgium; Spain; Madrid Spain; flexible polyurethane foams; calcium carbonate; styrene–acrylonitrile; polyurethane composites; glycolysis; physical and mechanical properties
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma17122844

The glycolysis process of flexible polyurethane foams containing styrene-acrylonitrile and calcium carbonate as fillers was explored in detail. The use of DABCO as a catalyst allowed us to reduce the catalyst concentration and the polyurethane-to-glycol mass ratio to 0.1% and 1:1, respectively. The glycolysis process allowed us to obtain a high-purity polyol (99%), which can totally replace raw polyols in the synthesis of new flexible polyurethane foams, maintaining the standard mechanical properties of the original one and modifying the ratio of isocyanates employed to correct the closed cell structure caused by the impurities present in the recovered polyol. This isocyanate mixture was also optimized, resulting in a ratio of 30 and 70% of the isocyanates TDI80 and TDI65, respectively. Additionally, the fillers incorporated in the glycolyzed foams were recovered. Both recovered fillers, styrene-acrylonitrile and calcium carbonate, were fully characterized, showing a quality very similar to that of commercial compounds. Finally, the replacement of commercial fillers by the recovered ones in the synthesis of new polyurethane foams was studied, demonstrating the feasibility of using them in the synthesis of new foams without significantly altering their properties.