Heat Transfer Intensification in a Heat Exchanger by Means of Twisted Tapes in Rib and Sawtooth Forms

• Published in: Energies (Basel) Vol. 15; no. 23; p. 8855
• Main Authors: Poonpakdee, Pasu, Samutpraphut, Boonsong, Thianpong, Chinaruk, Chokphoemphun, Suriya, Eiamsa-ard, Smith, Maruyama, Naoki, Hirota, Masafumi
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.12.2022
• Subjects: aerothermal performance index; Design and construction; Efficiency; Fluid dynamics; Fluid flow; Friction; friction factor; Friction loss; Heat exchangers; Heat flux; Heat transfer; heat transfer enhancement; Nanoparticles; Ratios; Reynolds number; swirling flow; Tube heat exchangers; twisted tapes in rib and sawtooth form; vortex flow; Working fluids; Thailand
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en15238855

This experimental study aimed to intensify the aerothermal performance index (API) in a round tube heat exchanger employing twisted tapes in rib and sawtooth forms (TTRSs) as swirl/vortex flow generators. The TTRSs have a constant twist ratio of 3.0, a constant rib pitch ratio (p/e) of 1.0, and six different sawtooth angles (α = 20°, 30°, 40°, 50°, 60°, and 70°). Experiments were carried out in an open flow using air as the working fluid for Reynolds numbers between 6000 and 20,000 in the current study, which was conducted in a heated tube under conditions of uniform wall heat flux. A typical twisted tape (TT) was also tested for comparison. The experimental results suggest that TTRSs yield Nusselt numbers ranging from 1.42 to 2.10 times of those of a plain tube. TTRSs with larger sawtooth angles (α) offer superior heat transfer. The TTRSs with α = 20°, 30°, 40°, 50°, 60°, and 70° respectively, enhance average Nusselt numbers by 158%, 162%, 166%, 172%, 180%, and 187% with average friction factors of 3.51, 3.55, 3.60, 3.67, 3.75 and 3.82 times higher than a plain tube. Additionally, TTRSs with sawtooth angles (α) of 20°, 30°, 40°, 50°, 60°, and 70° offer APIs in the ranges of 0.99 to 1.19, 1.01 to 1.21, 1.03 to 1.26, 1.05 to 1.31, 1.07 to 1.42, and 1.09 to 1.48, respectively, which are higher than those of the typical twisted tape (TT) by around 5%, 7%, 11%, 16%, 25%, and 31%, respectively. This demonstrates that twisted tapes in rib and sawtooth form (TTRSs), with appropriate geometries, give a promising trade-off between enhanced heat transfer and an increased friction loss penalty.