Experimental and Numerical Study on the Elimination of Severe Slugging by Riser Outlet Choking

• Published in: Energies (Basel) Vol. 15; no. 19; p. 7284
• Main Authors: Li, Nailiang, Chen, Bin, Du, Xueping, Han, Dongtai
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.10.2022
• Subjects: Analysis; Base pressure; Bending stresses; Choking; elimination method; Flow distribution; Flow pattern; Flow rates; Gas pipelines; Liquid hold up; Mass flow; Mathematical models; Measurement techniques; Multiphase flow; multiphase flow pattern; Numerical models; Offshore; OLGA predictions; Oscillations; Pressure; severe slugging; Slug flow; Stress concentration
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en15197284

Severe slugging is an unstable multiphase flow pattern occurs in a pipeline riser with low gas and liquid flowrates. It is highly undesired in practical operation because of the pressure and mass flow oscillations induced. Riser outlet choking has shown effectiveness in eliminating or reducing the severity of the slugging. This work presents an experimental and numerical study on the elimination of severe riser-induced slug by means of riser outlet choking. The test loop consists of a horizontal pipeline with 50 mm i.d. and 15 m in length, followed by a downward inclined section and a vertical riser of 2 m. It was found that by choking the flow at riser outlet, flow pattern in the riser changes from severe slugging first into slug flow and then into bubbly flow. The recognition of the flow regimes was basically according to the trends of the riser base pressure. The flow patterns were characterized in terms of pressure at riser base, as well as liquid holdup at riser top. A numerical model was developed accordingly using OLGA to investigate the dynamic behavior in the process of riser outlet choking.