The selection of volume ratio of two-stage rotary compressor and its effects on air-to-water heat pump with flash tank cycle

• Published in: Applied energy Vol. 104; pp. 187 - 196
• Main Authors: Ko, Younghwan, Park, Sangkyoung, Jin, Simon, Kim, Byungsoon, Jeong, Ji Hwan
• Format: Journal Article
• Language: English
• Published: Kidlington Elsevier Ltd 01.04.2013; Elsevier
• Subjects: Air-to-water heat pump; ambient temperature; Applied sciences; cold zones; Devices using thermal energy; Energy; Energy. Thermal use of fuels; Exact sciences and technology; Flash tank; heat; Heat pumps; Two-stage rotary compressor; Vapor injection; vapors; Volume ratio; water temperature; Air-to-water heat pump; Two-stage rotary compressor; Flash tank; Volume ratio; Vapor injection; Vapor; Air to water heat pump; Rotary compressor; Injection
• ISSN: 0306-2619; 1872-9118
• DOI: 10.1016/j.apenergy.2012.11.021

► Two-stage rotary compressor was developed for vapor injection cycle. ► The effect of volume ratio of a two-stage rotary compressor on AWHP was investigated. ► Experimental investigation on vapor injection air-to-water heat pump. ► Higher COP and larger heating capacity than conventional AWHP at cold climate. A conventional heat pump exhibits performance degradation even though larger heating capacity is needed as the outdoor temperature declines. As a way to prevent the performance degradation, a heat pump with an inverter-driven two-stage rotary compressor and vapor injection (VI) cycle was investigated for an air-to-water heat pump (AWHP) system employing a flash tank. The volume ratio of two cylinder of a two-stage rotary compressor has significant effect on the performance of the AWHP so that it was experimentally investigated. Based on this result, a two-stage rotary compressor designed with an optimized volume ratio was manufactured and incorporated into the AWHP system. It was found that the VI AWHP system improved the heating capacity by 48% and the COP by 36% compared to those values for the conventional AWHP at water temperature of 60°C and ambient temperature of −15°C. This VI AWHP system can be used for cold climate applications.