The effect of nano-additive TiO2 on the failure process of self-compacting concrete assessed using the acoustic emission method

• Published in: MATEC Web of Conferences Vol. 174; p. 2003
• Main Author: Niewiadomski, Paweł
• Format: Journal Article Conference Proceeding
• Language: English
• Published: Les Ulis EDP Sciences 01.01.2018
• Subjects: Acoustic emission testing; Acoustics; Additives; Concrete; Emission analysis; Failure; Literature reviews; Mechanical properties; Physical properties; Self-compacting concrete; Sustainable development; Titanium dioxide
• ISSN: 2261-236X; 2274-7214; 2261-236X
• DOI: 10.1051/matecconf/201817402003

Due to the new challenges posed to engineering constructions, as well as the principles of sustainable development, many laboratories around the world are carrying out works to improve the basic structural material that is concrete. There has recently been a lot of interest in modifying concrete with nano-sized particles. Literature reviews indicate that their addition significantly improves the physical and mechanical properties of the concrete that was obtained with their use. Until now, there is no knowledge of the effect of nano-additives on the process of destroying temporarily compressed concrete. One test method that enables the parameters that describe the stress failure of concrete to be determined is the acoustic emission method. This work fills the gap in the literature and presents the results of the author's own research on the impact of the use of different amounts of nano-additive TiO2 on the failure process of selfcompacting concrete that was made solely on the basis of granite aggregate. The stress failure of the tested concrete was described using the stress levels (determined using the acoustic emission method) that initiate the cracking σi and critical stresses σcr that delimit the tested process. The descriptors that were used for this purpose are the rate of counts and the average effective value of the acoustic emission signal.