Numerical comparison of bubbling in a waste glass melter

• Published in: Annals of nuclear energy Vol. 113; pp. 380 - 392
• Main Authors: Guillen, Donna Post, Cambareri, Joseph, Abboud, Alexander W., Bolotnov, Igor A.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.03.2018
• Subjects: Bubbling; Computational fluid dynamics; Interface capturing methods; Two-phase flow modeling; Waste glass melter model; Waste vitrification; Bubbling; Two-phase flow modeling; Interface capturing methods; Computational fluid dynamics; Waste vitrification; Waste glass melter model
• ISSN: 0306-4549; 1873-2100
• DOI: 10.1016/j.anucene.2017.11.044

•Use of CFD models to accurately reproduce the bubbling behavior in a waste glass melter.•Code-to-code comparison for simulating flows of two immiscible Newtonian fluids.•Evaluation of the volume of fluid and level set methods to resolve interfaces.•Results include bubble size, velocity, and affected area at free surface.•Numerical predictions from the two codes are within 2–6%. Radioactive tank waste is scheduled for vitrification at the Waste Treatment and Immobilization Plant (WTP) being constructed at the Hanford Site. Testing of the pilot-scale DuraMelter 1200 at the Vitreous State Laboratory at the Catholic University of America has demonstrated that bubbling increases the melt rate of the batch material, and as a result, melter throughput. Computational fluid dynamics (CFD) models of this pilot-scale waste glass melter are being developed to improve our understanding of the processes that occur within the melter to aid in process optimization and troubleshooting of the WTP melters. Unfortunately, model validation is complicated by the difficulty of obtaining suitable experimental data for operational melters due to the inaccessibility for direct observation and measurements of the high-temperature, opaque fluid through the water-jacketed, refractory-lined steel vessel. This study focuses on assessing the fidelity of the CFD models to accurately predict the bubbling behavior. Because of the paucity of experimental data at the resolution required for CFD validation, a code comparison was used to evaluate two common approaches for simulating flows of two immiscible Newtonian fluids on numerical grids and resolving multiphase interfaces. Here, the volume of fluid and level set methods are used to resolve the dynamically evolving interfaces between the molten glass and the air bubbles. To aid in the validation of the results of these codes, a comparison of the bubble behavior, growth, and frequency of bubble generation are presented and a grid convergence study is performed for the two approaches. The predictions from the two codes are within 6% for the average bubble radius of curvature within the bubble channels, within 2% for average terminal rise velocity of the bubbles, and within 4% for the area mean of the local maxima at the free surface. These parameters are of interest since they affect the convection within the melter and at the interface between the glass and batch layer. Ultimately, the results of this work can assist in confirming the predictive ability of waste glass melter models and provide a better understanding of the flow patterns within the WTP melters.