Passive coherent discriminator using phase diversity for the simultaneous measurement of frequency noise and intensity noise of a continuous-wave laser

• Published in: Metrologia Vol. 53; no. 5; pp. 1154 - 1164
• Main Authors: Michaud-Belleau, V, Bergeron, H, Light, P S, Hébert, N B, Deschênes, J D, Luiten, A N, Genest, J
• Format: Journal Article
• Language: English
• Published: Bristol IOP Publishing 01.10.2016
• Subjects: Coherence; coherent frequency discriminator; Discriminators; Interferometers; laser noise measurement; Lasers; Measurement; Noise; Noise intensity; Noise measurement; optical 90 hybrid coupler; passive homodyne; Spectra; Spectrum analysis
• ISSN: 0026-1394; 1681-7575
• DOI: 10.1088/0026-1394/53/5/1154

The frequency noise and intensity noise of a laser set the performance limits in many modern photonics applications and, consequently, must often be characterized. As lasers continue to improve, the measurement of these noises however becomes increasingly challenging. Current approaches for the characterization of very high-performance lasers often call for a second laser with equal or higher performance to the one that is to be measured, an incoherent interferometer having an extremely long delay-arm, or an interferometer that relies on an active device. These instrumental features can be impractical or problematic under certain experimental conditions. As an alternative, this paper presents an entirely passive coherent interferometer that employs an optical 90° hybrid coupler to perform in-phase and quadrature detection. We demonstrate the technique by measuring the frequency noise power spectral density of a highly-stable 192 THz (1560 nm) fiber laser over five frequency decades. Simultaneously, we are able to measure its relative intensity noise power spectral density and characterize the correlation between its amplitude noise and phase noise. We correct some common misconceptions through a detailed theoretical analysis and demonstrate the necessity to account for normal imperfections of the optical 90° hybrid coupler. We finally conclude that this passive coherent discriminator is suitable for reliable and simple noise characterization of highly-stable lasers, with bandwidth and dynamic range benefits but susceptibility to additive noise contamination.