Mechanical degradation of biological heart valve tissue induced by low diameter crimping: An early assessment

• Published in: Journal of the mechanical behavior of biomedical materials Vol. 44; pp. 71 - 75
• Main Authors: Khoffi, Foued, Heim, Frederic
• Format: Journal Article
• Language: English
• Published: Netherlands Elsevier Ltd 01.04.2015
• Subjects: Catheters; Crimping; Engineering Sciences; Heart valve; Heart Valve Prosthesis; Materials Testing; Mechanical Phenomena; Other; Pericardium - cytology; Pericardium leaflets; Prosthesis Failure; Stents; Stress, Mechanical; Transcatheter; Crimping; Heart valve; Transcatheter; Pericardium leaflets
• ISSN: 1751-6161; 1878-0180; 1878-0180
• DOI: 10.1016/j.jmbbm.2015.01.005

Transcatheter aortic valve implantation (TAVI) has become today an increasingly attractive procedure to relieve patients from aortic valve disease. However, the procedure requires crimping biological tissue within a metallic stent for low diameter catheter insertion purpose. This step induces specific stress in the leaflets especially when the crimping diameter is small. One concern about crimping is the potential degradations undergone by the biological tissue, which may limit the durability of the valve once implanted. The purpose of the present work is to study the effect of low diameter crimping on the mechanical performances of pericardium valve prototypes. The prototypes were compressed to a diameter of 1mm within braided stents for 20min. SEM observations performed on crimped material show that crimped leaflets undergo degradations characterized by apparent surface defects. Moreover mechanical extension tests were performed on pericardium strips before and after crimping. The strips (15mm long, 5mm wide) were taken from both crimped and native leaflets considering 2 different valve diameters, 19 and 21mm. In order to prevent the premature drying of the pericardium tissue during the procedure, the biological tissue was kept in contact with a formaldehyde solution. Results show that the ultimate strength value decreases nearly by up to 50%. The modifications observed in the material may jeopardize the long term durability of the device. However, further tests are necessary with a larger amount of samples to confirm these early results.