Tangential synthetic jets for separation control

• Published in: Journal of fluids and structures Vol. 45; pp. 50 - 65
• Main Authors: Esmaeili Monir, H., Tadjfar, M., Bakhtian, A.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.02.2014
• Subjects: Activation; Computational fluid dynamics; Flow control; Fluid flow; Mathematical models; Navier-Stokes equations; Separation; Separation vortex control; Tangential synthetic jet; Turbulence; Turbulent flow; Zero-net-mass-flux (ZNMF) jets; Flow control; Zero-net-mass-flux (ZNMF) jets; Tangential synthetic jet; Separation vortex control
• ISSN: 0889-9746; 1095-8622
• DOI: 10.1016/j.jfluidstructs.2013.11.011

A numerical study of separation control has been made to investigate aerodynamic characteristics of a NACA23012 airfoil with a tangential synthetic jet. Simulations are carried out at the chord Reynolds number of Re=2.19×106. The present approach relies on solving the Unsteady Reynolds-Averaged Navier–Stokes (URANS) equations. The turbulence model used in the present computation is the Spalart–Allmaras one-equation model. All computations are performed with a finite volume based code. Stall characteristics are significantly improved by controlling the formation of separation vortices in the flow. We placed the synthetic jet at the 12% chord, xj=0.12c, where we expected the separation to occur. Two distinct jet oscillating frequencies: Fj+=0.159 and Fj+=1 were considered. We studied the effect of blowing ratio, Vj/U∞, where it was varied from 0 to 5. The inclined angle of the synthetic jet was varied from αj=0° up to αj=83°. For the non-zero inclined angles, the local maximum in the aerodynamic performance, Cl/Cd, of 6.89 was found for the inclined angle of about 43°. In the present method, by means of creating a dent on the airfoil, linear momentum is transferred to the flow system in tangential direction to the airfoil surface. Thus the absolute maximum of 11.19 was found for the tangential synthetic jet at the inclined angle of the jet of 0°. The mechanisms involved for a tangential jet appear to behave linearly, as by multiplying the activation frequency of the jet by a factor produces the same multiplication factor in the resulting frequency in the flow. However, the mechanisms involved in the non-zero inclined angle cases behave nonlinearly when the activation frequency is multiplied.