Testing fireproof materials in a combustion chamber

• Published in: EPJ Web of Conferences Vol. 143; p. 2058
• Main Authors: Kulhavy, Petr, Martinec, Tomas, Novak, Ondrej, Petru, Michal, Srb, Pavel
• Format: Journal Article Conference Proceeding
• Language: English
• Published: Les Ulis EDP Sciences 01.01.2017
• Subjects: Combustion chambers; Composite materials; Computer simulation; Construction standards; Fillers; Fire resistance; Fire resistant materials; Heat release rate; Mathematical models; Shutters; Temperature distribution; Thermocouples
• ISSN: 2100-014X; 2101-6275; 2100-014X
• DOI: 10.1051/epjconf/201714302058

This article deals with a prototype concept, real experiment and numerical simulation of a combustion chamber, designed for testing fire resistance some new insulating composite materials. This concept of a device used for testing various materials, providing possibility of monitoring temperatures during controlled gas combustion. As a fuel for the combustion process propane butane mixture has been used and also several kinds of burners with various conditions of inlet air (forced, free) and fuel flows were tested. The tested samples were layered sandwich materials based on various materials or foams, used as fillers in fire shutters. The temperature distribution was measured by using thermocouples. A simulation of whole concept of experimental chamber has been carried out as the non-premixed combustion process in the commercial final volume sw Pyrosim. The result was to design chamber with a construction suitable, according to the international standards, achieve the required values (temperature in time). Model of the combustion based on a stoichiometric defined mixture of gas and the tested layered samples showed good conformity with experimental results – i.e. thermal distribution inside and heat release rate that has gone through the sample.