The Effects of Combined Infill Patterns on Mechanical Properties in FDM Process

• Published in: Polymers Vol. 12; no. 12; p. 2792
• Main Authors: Lalegani Dezaki, Mohammadreza, Mohd Ariffin, Mohd Khairol Anuar
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI 26.11.2020
• Subjects: polymer; fused deposition modeling; additive manufacturing; polylactic acid; 3D printing
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym12122792

Fused deposition modeling (FDM) is commonly used to print different products with highly complex features. Process parameters for FDM are divided into controllable or uncontrollable parameters. The most critical ones are built orientation, layer thickness, infill pattern, infill density, and nozzle diameter. This study investigates the effects of combined infill patterns in 3D printed products. Five patterns (solid, honeycomb, wiggle, grid, and rectilinear) were combined in samples to analyze their effects on mechanical properties for tensile strength analysis. Polylactic acid (PLA) samples were printed in different build orientations through two directions: flat and on-edge. The limitation was that the software and machine could not combine the infill patterns. Thus, the patterns were designed and assembled in computer aided design (CAD) software. Finite element analysis (FEA) was used to determine the patterns’ features and results showed honeycomb and grid have the highest strength while their weights were lighter compared to solid. Moreover, 0° samples in both flat and on-edge direction had the strongest layer adhesion and the best quality. In contrast, perpendicular samples like 60° and 75° showed poor adhesion and were the weakest specimens in both flat and on-edge, respectively. In brief, by increasing the build orientation, the strength decreases in this study.