Manufacturing a TiO2-Based Semiconductor Film with Nanofluid Pool Boiling and Sintering Processes toward Solar-Cell Applications

• Published in: Nanomaterials (Basel, Switzerland) Vol. 12; no. 7; p. 1165
• Main Authors: Vafaei, Saeid, Holmes, Ian, Errion, Benjamin, Thukka, Zigmey, Narita, Ryoki, Sugiura, Takashi, Manseki, Kazuhiro
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 31.03.2022; MDPI
• Subjects: Anatase; Boiling; Crystal growth; crystallization; Deposition; Ethanol; Furuncles; Glass substrates; Grain size; Heat; High resolution electron microscopy; Light; nanofluid pool boiling; Nanofluids; Nanoparticles; Photovoltaic cells; Scanning electron microscopy; Sintering; Solar cells; Spin coating; Substrates; Tin dioxide; TiO2; Titanium dioxide; Transmission electron microscopy; Chicago Illinois; St Louis Missouri; United States > US; Japan
• ISSN: 2079-4991; 2079-4991
• DOI: 10.3390/nano12071165

For the first time, nanofluid boiling was applied as a process for the creation of a semiconductor TiO2 nanoparticle film that can be deposited onto a conductive substrate (F-doped SnO2 glass: FTO). A steel-base device designed for pool boiling was used to deposit a TiO2-based nanofluid consisting of nanoparticles with an average size of about 20 nm. The boiling of the nanofluid directly on the FTO glass substrate allowed for the deposition of the nanoparticles onto the FTO surface. In principle, the surface responsible for transferring heat to the fluid can be covered with these nanoparticles when the nanofluid boils. Using the as-deposited films, crystal growth of the TiO2 nanoparticle was controlled by varying the strategies of the post-sintering profile. The maximum temperatures, periods, and ramping rates for the obtained samples were systematically changed. Scanning electron microscopy (SEM) revealed that a densely packed TiO2-nanoparticle layer was obtained for the as-deposited substrate via pool boiling. For the maximum temperature at 550 °C, the TiO2 grain sizes became larger (~50 nm) and more round-shaped TiO2 nanostructures were identified. Notably, we have demonstrated for the first time how the sintering of TiO2 nanoparticles proceeds for the nanoporous TiO2 films using high-resolution transmission electron microscopy (TEM) measurements. We found that the TiO2 nanoparticles fused with each other and crystal growth occurred through neighboring 2–4 nanoparticles for the 550 °C sample, which was proved by the TEM analysis that continuous lattice fringes corresponding to the (101) anatase phase were clearly observed through the entire area of some nanoparticles aligned horizontally. In addition, the loss of the TiO2 nanofluid (precursor solution) was completely avoided in our TiO2 deposition. Unlike the commonly used spin-coating method, nanofluid pool boiling would provide an alternative cost-effective approach to manufacture semiconductor layers for various applications, such as solar cells.