2.3 GPa cryogenic strength through thermal-induced and deformation-induced body-centered cubic martensite in a novel ferrous medium entropy alloy
A novel non-equiatomic FeCoNiAlTiMo ferrous medium-entropy alloy (MEA) with ultra-high tensile strengths at 298 and 77 K is presented in this work. By subjecting the MEA to hot rolling without further heat treatment, a quasi-dual-phase microstructure consisting of retained face-centered cubic (FCC)...
Saved in:
Published in | Scripta materialia Vol. 204; p. 114157 |
---|---|
Main Authors | , , , , , , , , |
Format | Journal Article |
Language | English |
Published |
Elsevier Ltd
01.11.2021
|
Subjects | |
Online Access | Get full text |
Cover
Loading…
Summary: | A novel non-equiatomic FeCoNiAlTiMo ferrous medium-entropy alloy (MEA) with ultra-high tensile strengths at 298 and 77 K is presented in this work. By subjecting the MEA to hot rolling without further heat treatment, a quasi-dual-phase microstructure consisting of retained face-centered cubic (FCC) and thermal body-centered cubic martensite (BCC) phases with a very high density of dislocations and precipitates of Mo-rich µ phase was created. The high dislocation density significantly accelerated deformation-induced martensitic transformation from the remaining metastable FCC to BCC and successfully increased strain hardening ability. The strain hardening ability was even higher at 77 K due to decreasing FCC phase stability at lower temperatures. The increased strain hardening ability led to an excellent balance of strength and ductility, with ultimate tensile strength/uniform elongation of ~1.5 GPa/~15% at 298 K and ~2.3 GPa/~11% at 77 K.
[Display omitted] |
---|---|
ISSN: | 1359-6462 1872-8456 |
DOI: | 10.1016/j.scriptamat.2021.114157 |