A Coupled Experiment-finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials

• Published in: Journal of visualized experiments no. 99; p. e51545
• Main Authors: Prabhu, Rajkumar, Whittington, Wilburn R, Patnaik, Sourav S, Mao, Yuxiong, Begonia, Mark T, Williams, Lakiesha N, Liao, Jun, Horstemeyer, M F
• Format: Journal Article
• Language: English
• Published: United States MyJove Corporation 18.05.2015
• Subjects: Adipose Tissue - anatomy & histology; Adipose Tissue - chemistry; Bioengineering; Brain - anatomy & histology; Brain Chemistry; Finite Element Analysis; Humans; Liver - anatomy & histology; Liver - chemistry; Mechanical Phenomena; Stress, Mechanical; Tendons - anatomy & histology; Tendons - chemistry
• ISSN: 1940-087X; 1940-087X
• DOI: 10.3791/51545

This study offers a combined experimental and finite element (FE) simulation approach for examining the mechanical behavior of soft biomaterials (e.g. brain, liver, tendon, fat, etc.) when exposed to high strain rates. This study utilized a Split-Hopkinson Pressure Bar (SHPB) to generate strain rates of 100-1,500 sec(-1). The SHPB employed a striker bar consisting of a viscoelastic material (polycarbonate). A sample of the biomaterial was obtained shortly postmortem and prepared for SHPB testing. The specimen was interposed between the incident and transmitted bars, and the pneumatic components of the SHPB were activated to drive the striker bar toward the incident bar. The resulting impact generated a compressive stress wave (i.e. incident wave) that traveled through the incident bar. When the compressive stress wave reached the end of the incident bar, a portion continued forward through the sample and transmitted bar (i.e. transmitted wave) while another portion reversed through the incident bar as a tensile wave (i.e. reflected wave). These waves were measured using strain gages mounted on the incident and transmitted bars. The true stress-strain behavior of the sample was determined from equations based on wave propagation and dynamic force equilibrium. The experimental stress-strain response was three dimensional in nature because the specimen bulged. As such, the hydrostatic stress (first invariant) was used to generate the stress-strain response. In order to extract the uniaxial (one-dimensional) mechanical response of the tissue, an iterative coupled optimization was performed using experimental results and Finite Element Analysis (FEA), which contained an Internal State Variable (ISV) material model used for the tissue. The ISV material model used in the FE simulations of the experimental setup was iteratively calibrated (i.e. optimized) to the experimental data such that the experiment and FEA strain gage values and first invariant of stresses were in good agreement.