Effect of Diamond Burnishing on Fatigue Behaviour of AISI 304 Chromium-Nickel Austenitic Stainless Steel

• Published in: Materials Vol. 15; no. 14; p. 4768
• Main Authors: Maximov, Jordan, Duncheva, Galya, Anchev, Angel, Dunchev, Vladimir, Argirov, Yaroslav
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 07.07.2022; MDPI
• Subjects: Austenitic stainless steels; Bend strength; Bending fatigue; Burnishing; Cold; Cold working; Corrosion resistance; Deformation; Diamond burnishing; Diamonds; enhancement of fatigue strength; Fatigue limit; Fatigue strength; Fatigue tests; Low temperature; Mechanical properties; Metal fatigue; Microhardness; Nickel chromium steels; Nickel steels; Parameters; residual stresses; Rotation; Stainless steel; Strain hardening; strain-induced martensite; Surface layers; Surface treatment; Tensile strength; Wear resistance
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma15144768

The disadvantages of widely used austenitic stainless steels are their low hardness and relatively low fatigue strength. Conventional chemical-thermal surface treatments are unsuitable for these steels since they create conditions for inter-granular corrosion. An effective alternative is a low-temperature surface treatment, creating an S-phase within the surface layer, but it has a high cost/quality ratio. Austenitic steels can increase their surface micro-hardness and fatigue strength via surface cold working. When the goal is to increase the rotating bending fatigue strength of austenitic chromium-nickel steels, and the requirements for significant wear resistance are not paramount, diamond burnishing (DB) has significant potential to increase the fatigue strength and, based on the cost/quality ratio, can successfully compete with low-temperature chemical-thermal treatments. The main objective of this study is to establish the effect of DB on the rotating fatigue strength of AISI 304 L chromium-nickel austenitic steel. The influence of DB parameters on the surface integrity (SI) characteristics was studied. Optimal DB parameters under minimum roughness and maximum micro-hardness criteria were obtained. Rotating bending fatigue tests of the diamond burnished (in a different manner) and untreated specimens were performed. DB implemented via parameters providing maximum micro-hardness increased fatigue limit by 38% compared to untreated specimens.