S–N Fatigue and Fatigue Crack Propagation Behaviors of X80 Steel at Room and Low Temperatures

• Published in: Metallurgical and materials transactions. A, Physical metallurgy and materials science Vol. 45; no. 2; pp. 654 - 662
• Main Authors: Jung, Dae-Ho, Kwon, Jae-Ki, Woo, Nam-Sub, Kim, Young-Ju, Goto, Masahiro, Kim, Sangshik
• Format: Journal Article
• Language: English
• Published: Boston Springer US 01.02.2014; Springer; Springer Nature B.V
• Subjects: Applied sciences; Characterization and Evaluation of Materials; Chemistry and Materials Science; Crack propagation; Exact sciences and technology; Fatigue; Fatigue failure; Fatigue life; Heat affected zone; High strength low alloy steels; Low temperature physics; Materials Science; Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology; Metallic Materials; Metals. Metallurgy; Microstructure; Nanotechnology; Physical metallurgy; Steel; Steels; Strength; Structural Materials; Surfaces and Interfaces; Thin Films; Martensite Austenite; Fatigue Crack Propagation; Fatigue Crack Propagation Rate; Weld Metal; Compressive Residual Stress; Microalloyed steel; Mechanical properties; Fatigue; Room temperature; Low temperature; Fatigue crack; Crack propagation
• ISSN: 1073-5623; 1543-1940
• DOI: 10.1007/s11661-013-2012-4

In the present study, the S–N fatigue and the fatigue crack propagation (FCP) behaviors of American Petroleum Institute X80 steel were examined in the different locations of the base metal (BM), weld metal (WM), and heat-affected zone (HAZ) at 298 K, 223 K, and 193 K (25 °C, −50 °C, and −80 °C). The resistance to S–N fatigue of X80 BM specimen increased greatly with decreasing temperature from 298 K to 193 K (25 °C to −80 °C) and showed a strong dependency on the flow strength (½(yield strength + tensile strength)). The FCP rates of X80 BM specimen were substantially reduced with decreasing temperature from 298 K to 223 K (25 °C to −50 °C) over the entire ∆ K regime, while further reduction in FCP rates was not significant with temperature from 223 K to 193 K (−50 °C to −80 °C). The FCP rates of the X80 BM and the WM specimens were comparable with each other, while the HAZ specimen showed slightly better FCP resistance than the BM and the WM specimens over the entire ∆K regime at 298 K (25 °C). Despite the varying microstructural characteristics of each weld location, the residual stress appeared to be a controlling factor to determine the FCP behavior. The FCP behaviors of high strength X80 steel were discussed based on the microstructural and the fractographic observations.