Novel quaternary ammonium functional addition-type norbornene copolymer as hydroxide-conductive and durable anion exchange membrane for direct methanol fuel cells

• Published in: RSC advances Vol. 5; no. 78; pp. 63215 - 63225
• Main Authors: He, Xiaohui, Liu, Jingyin, Zhu, Hongyu, Zheng, Yan, Chen, Defu
• Format: Journal Article
• Language: English
• Published: 01.01.2015
• Subjects: Anion exchanging; Copolymers; Current density; Exchange; Fuel cells; Ion exchangers; Membranes; Methyl alcohol
• ISSN: 2046-2069; 2046-2069
• DOI: 10.1039/c5ra09393g

Novel quaternary ammonium functional addition-type norbornene copolymers (Q C n P(BN/PhBN), n = 1, 6, 10, 12) with different alkyl side chain length comb-shaped structures or different contents of 2-(4-phenyl-butoxymethy-lene)-5-norbornene (PhBN) (22-77%) are synthesized via copolymerization of functionalized norbornenes, and their corresponding hydroxide-conductive anion exchange membranes (AEMs) with effective hydrophilic-hydrophobic separation are prepared and confirmed by TEM or SEM. The achieved AEMs show high ion exchange capacity (1.83 mmol g −1 ), as well as low methanol permeability (1.97-20.4 × 10 −7 cm 2 s −1 ), which are lower than that of Nafion®. The ionic conductivity increases with the operation temperature increasing and is observed up to 4.14 × 10 −3 S cm −1 . The AEMs exhibit excellent dimensional stability with a swelling degree in plane between 0.9-3.3% and good chemical stability under 6 M NaOH solution even after a month. Membrane electrode assembly (MEA) is fabricated by using the alkalized Q C12 P(BN/PhBN)-77 as the AEM and tested in an alkaline direct methanol fuel cell. The open circuit voltage (OVC) of 0.54 V and the maximum current density of 66 mW cm −2 are achieved at 80 °C, respectively. Novel quaternary ammonium functional addition-type norbornene copolymers, and their anion exchange membranes with effective hydrophilic-hydrophobic separation and well performance suitable for direct methanol fuel cells application are achieved.