Influence of CaO and SiO2 additives on the sintering behavior of Cr,Ca:YAG ceramics prepared by solid-state reaction sintering

• Published in: Ceramics international Vol. 46; no. 14; pp. 22781 - 22786
• Main Authors: Chaika, M.A., Mancardi, G., Vovk, O.M.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.10.2020
• Subjects: Ceramics; Morphology; Optical spectroscopy; Sintering aid; Vacuum sintering; YAG; Vacuum sintering; Optical spectroscopy; Ceramics; Sintering aid; Morphology; YAG
• ISSN: 0272-8842; 1873-3956
• DOI: 10.1016/j.ceramint.2020.06.045

Yttrium aluminum garnet optical ceramics (Y3−xCaxAl4.95Cr0.05O12) doped with 0.1 at.% of chromium ions and 0.5, 0.8 and 1.2 at.% of calcium ions were prepared by reactive sintering in vacuum at 1750°C. The influence of SiO2 and CaO sintering aids on optical properties and microstructure of Cr,Ca:YAG ceramics was investigated. A decrease in CaO concentration led to a reduction of the Cr,Ca:YAG ceramics transparency from 81 to 0% at 1064 nm, moreover, samples with a lower concentration of CaO had abnormal grains and high-level porosity. The obtained features were attributed to the interactions between silica and calcium oxide during vacuum sintering of Cr,Ca:YAG ceramics. We propose and discuss two possible ways in which CaO and SiO2 influence the formation of Ca,Cr:YAG ceramics. The first one involves the appearance of a liquid phase thanks to the CaO–SiO2 interaction during the heating stage of ceramics sintering which results in abnormal growth of ceramics grains. The second mechanism consists on the mutual consumption of Si4+ and Ca2+ ions during the isothermal stage of ceramic sintering, which leads to a decrease in Cr4+ concentration. Both mechanisms have a negative effect on the optical and laser properties of the ceramics.