Thermal dehydration tests of FLiNaK salt for thermal-hydraulic experiments

• Published in: Nuclear engineering and technology Vol. 56; no. 3; pp. 1091 - 1099
• Main Authors: Che, Shuai, Zhang, Sheng, Burak, Adam, Sun, Xiaodong
• Format: Journal Article
• Language: English
• Published: Korea, Republic of Elsevier B.V 01.03.2024; Elsevier; 한국원자력학회
• Subjects: FHR; FLiNaK salt; Moisture removal; Thermal dehydration; Thermal-hydraulic experiments; 원자력공학; Thermal-hydraulic experiments; FHR; Thermal dehydration; Moisture removal; FLiNaK salt
• ISSN: 1738-5733; 2234-358X
• DOI: 10.1016/j.net.2024.01.037

Fluoride-salt-cooled High-temperature Reactor (FHR) is a promising nuclear reactor technology. Among many challenges presented by the molten fluoride salts is the corrosion of salt-facing structural components. Higher moisture contents, in the FLiNaK (LiF-NaF-KF, 46.5–11.5-42 mol%) salt, aggravate intergranular corrosion and pitting for the given alloys. Therefore, several thermal dehydration tests of FLiNaK salt were performed with a batch size suitable for thermal-hydraulic experiments. Thermogravimetric Analysis (TGA) was performed for the three constituent fluoride salts individually. Preliminary thermal dehydration plans were then proposed for NaF and KF salts based on the TGA curves. However, the dehydration process may not be required for LiF since its low mass loss (<1.3 wt%). To evaluate the performance of these thermal dehydration plans, a batch-scale salt dehydration test facility was designed and constructed. The preliminary thermal dehydration plans were tested by varying the heating rates, target temperature, and holding time. The sample mass loss data showed that the high temperatures (>500 °C) were necessary to remove a significant amount of moisture (>1 wt%) from NaF salt, while relatively low temperatures (around 300 °C) with a long holding time (>10 h) were sufficient to remove most of the moisture from KF salt.