Microstructure and Mechanical Properties of Fe-based Amorphous Composite Coatings Reinforced by Stainless Steel Powders

• Published in: Journal of materials science & technology Vol. 31; no. 1; pp. 43 - 47
• Main Authors: Zhou, H., Zhang, C., Wang, W., Yasir, M., Liu, L.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 2015
• Subjects: amorphous; Amorphous structure; Austenitic stainless steels; Bonding strength; coating;Stainl; Coatings; Composite coatings; Ductility; Fe-based amorphous coating; Heat resistant steels; Microstructure; Scanning electron microscopy; spraying;Fe-based; Stainless steel; Stainless steels; Steels; Thermal; Thermal spraying; Bonding strength; Fe-based amorphous coating; Thermal spraying; Ductility; Stainless steel
• ISSN: 1005-0302; 1941-1162
• DOI: 10.1016/j.jmst.2014.09.008

In this study,a few Fe-based amorphous matrix composite coatings reinforced with various portions(4,8 and16 vol.%) of 31 6L stainless steel powders have been successfully produced through high velocity oxy-fuel(HVOF) spraying.The microstructure of the composite coatings was systematically characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and transmission electron microscopy(TEM).The main structure of composite coatings remained amorphous while 31 6L stainless steel splats were distributed homogeneously in the amorphous matrix and well connected with surrounding amorphous phase.Bonding strength of coatings to the substrate was determined by "pull-off" tensile tests.The results revealed that the31 6L stainless steel phase effectively improved the bonding strength of amorphous coatings,which is mainly contributed by the strong metallurgical bonding between stainless steel and amorphous splats.The addition of31 6L stainless steel also enhanced the ductility and fracture resistance of the coatings due to the ductile stainless steel phases,which can arrest crack propagation and increase energy dissipation.