Fuel assembly design study for a reactor with supercritical water

• Published in: Nuclear engineering and design Vol. 237; no. 14; pp. 1513 - 1521
• Main Authors: Hofmeister, J., Waata, C., Starflinger, J., Schulenberg, T., Laurien, E.
• Format: Journal Article
• Language: English
• Published: Amsterdam Elsevier B.V 01.08.2007; Elsevier
• Subjects: Applied sciences; Controled nuclear fusion plants; Energy; Energy. Thermal use of fuels; Exact sciences and technology; Fission nuclear power plants; Fuels; Installations for energy generation and conversion: thermal and electrical energy; Nuclear fuels; Coolant; Fuel assembly; Turbine; Thermohydraulics; Fuel rod; Thermal analysis; Water vapor; Pressure; Mass flow; Light water reactor; Reactor core; Nuclear reactor
• ISSN: 0029-5493; 1872-759X
• DOI: 10.1016/j.nucengdes.2007.01.008

The European concept of the High Performance Light Water Reactor (HPLWR) differs from current light water reactors in a higher system pressure beyond the critical point of water, as well as a higher heat-up of the coolant within the core and thus higher core outlet temperatures, leading to a significant increase in turbine power and thermal efficiency of the power plant. The motivation to develop a novel fuel assembly for the HPLWR is caused by the high variation of coolant density in the core by more than a factor of seven. A systematic design study shows that a square fuel assembly with two rows of fuel rods and a central moderator box is best to minimize the structural material, to optimize the moderator to fuel ratio and to reduce differences of fuel rod power. Using neutronic and thermal-hydraulic analyses, a detailed mechanical design of a fuel assembly of the HPLWR has been worked out. Moreover, concepts for the head piece, the foot piece, the steam plenum and the lower mixing plenum, including the lower core plate, have been developed to account for the individual flow paths of this reactor. These allow a leak-tight counter current flow of moderator water and coolant as well as uniform mixing of different mass flows. The assembly design concept can be used as a general key component for any advanced core design of this reactor.