Partial discharge measurements on 110kV current transformers. Setting the control value. Case study

• Published in: IOP conference series. Materials Science and Engineering Vol. 200; no. 1; pp. 12002 - 12009
• Main Authors: Dan, C, Morar, R
• Format: Journal Article
• Language: English
• Published: Bristol IOP Publishing 01.05.2017
• Subjects: Case studies; Control equipment; Discharge; Instrument transformers; Insulation; Substations
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/200/1/012002

The case study presents a series of partial discharge measurements, reflecting the state of insulation of 110kV CURRENT TRANSFORMERS located in Sibiu county substations. Measurements were performed based on electrical method, using MPD600: an acquisition and analysis toolkit for detecting, recording, and analyzing partial discharges. MPD600 consists of one acquisition unit, an optical interface and a computer with dedicated software. The system allows measurements of partial discharge on site, even in presence of strong electromagnetic interferences because it provides synchronous acquisition from all measurement points. Therefore, measurements, with the ability to be calibrated, do render: - a value subject to interpretation according to IEC 61869-1:2007 + IEC 61869-2:2012 + IEC 61869-3:2011 + IEC 61869-5:2011 and IEC 60270: 2000; - the possibility to determine the quantitative limit of PD (a certain control value) to which the equipment can be operated safely and repaired with minimal costs (relative to the high costs implied by eliminating the consequences of a failure) identified empirically (process in which the instrument transformer subjected to the tests was completely destroyed).