Integrated supply–demand energy management for optimal design of off-grid hybrid renewable energy systems for residential electrification in arid climates

[Display omitted] •An optimal design of an off-grid hybrid renewable energy system (HRES) is suggested.•Techno-economic feasibility study of the hybrid PV-wind-battery-diesel energy system.•The effects of demand-side management on the energy demand–supply is investigated.•Test the impact of battery...

Full description

Saved in:
Bibliographic Details
Published inEnergy conversion and management Vol. 221; p. 113192
Main Authors Mokhtara, Charafeddine, Negrou, Belkhir, Bouferrouk, Abdessalem, Yao, Yufeng, Settou, Noureddine, Ramadan, Mohamad
Format Journal Article
LanguageEnglish
Published Oxford Elsevier Ltd 01.10.2020
Elsevier Science Ltd
Subjects
Online AccessGet full text

Cover

Loading…
More Information
Summary:[Display omitted] •An optimal design of an off-grid hybrid renewable energy system (HRES) is suggested.•Techno-economic feasibility study of the hybrid PV-wind-battery-diesel energy system.•The effects of demand-side management on the energy demand–supply is investigated.•Test the impact of battery technology on the design of HRES through a sensitivity analysis.•Comparison between particle swarm optimization and HOMER software is made. The growing research interest in hybrid renewable energy systems (HRESs) has been regarded as a natural and yet critical response to address the challenge of rural electrification. Based on a Bibliometric analysis performed by authors, it was concluded that most studies simply adopted supply-side management techniques to perform the design optimization of such a renewable energy system. To further advance those studies, this paper presents a novel approach by integrating demand–supply management (DSM) with particle swarm optimization and applying it to optimally design an off-grid hybrid PV-solar-diesel-battery system for the electrification of residential buildings in arid environments, using a typical dwelling in Adrar, Algeria, as a case study. The proposed HRES is first modelled by an in-house MATLAB code based on a multi-agent system concept and then optimized by minimizing the total net present cost (TNPC), subject to reliability level and renewable energy penetration. After validation against the HOMER software, further techno-economic analyses including sensitivity study are undertaken, considering different battery technologies. By integrating the proposed DSM, the results have shown the following improvements: with RF = 100%, the energy demand and TNPC are reduced by 7% and 18%, respectively, compared to the case of using solely supply-side management. It is found that PV-Li-ion represents the best configuration, with TNPC of $23,427 and cost of energy (COE) of 0.23 $/kWh. However, with lower RF values, the following reductions are achieved: energy consumption (19%) and fuel consumption or CO2 emission (57%), respectively. In contrast, the RF is raised from 15% (without DSM) to 63% (with DSM). It is clear that the optimal configuration consists of wind-diesel, with COE of 0.21 $/kWh, smaller than that obtained with a stand-alone diesel generator system. The outcomes of this work can provide valuable insights into the successful design and deployment of HRES in Algeria and surrounding regions.
Bibliography:ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 14
content type line 23
ISSN:0196-8904
1879-2227
DOI:10.1016/j.enconman.2020.113192