A field-validated equilibrium passive sampler for the monitoring of per- and polyfluoroalkyl substances (PFAS) in sediment pore water and surface water

• Published in: Environmental science--processes & impacts Vol. 25; no. 5; pp. 98 - 995
• Main Authors: Medon, Blessing, Pautler, Brent G, Sweett, Alexander, Roberts, Jeff, Risacher, Florent F, D'Agostino, Lisa A, Conder, Jason, Gauthier, Jeremy R, Mabury, Scott A, Patterson, Andrew, McIsaac, Patricia, Mitzel, Robert, Hakimabadi, Seyfollah Gilak, Pham, Anh Le-Tuan
• Format: Journal Article
• Language: English
• Published: England Royal Society of Chemistry 25.05.2023
• Subjects: Biofouling; Coefficients; Constraining; Diffusion; Environmental Monitoring; Equilibrium; Field tests; Fluorocarbons; Laboratories; Mass transfer; Membranes; Monitoring; Perfluoroalkyl & polyfluoroalkyl substances; Polycarbonate; Pore water; Retrieval; Samplers; Sediments; Surface water; Water; Water analysis; Water Pollutants, Chemical - analysis; Water sampling
• ISSN: 2050-7887; 2050-7895
• DOI: 10.1039/d2em00483f

A simple equilibrium passive sampler, consisting of water in an inert container capped with a rate-limiting barrier, for the monitoring of per- and polyfluoroalkyl substances (PFAS) in sediment pore water and surface water was developed and tested through a series of laboratory and field experiments. The objectives of the laboratory experiments were to determine (1) the membrane type that could serve as the sampler's rate-limiting barrier, (2) the mass transfer coefficient of environmentally relevant PFAS through the selected membrane, and (3) the performance reference compounds (PRCs) that could be used to infer the kinetics of PFAS diffusing into the sampler. Of the membranes tested, the polycarbonate (PC) membrane was deemed the most suitable rate-limiting barrier, given that it did not appreciably adsorb the studied PFAS (which have ≤8 carbons), and that the migration of these compounds through this membrane could be described by Fick's law of diffusion. When employed as the PRC, the isotopically labelled PFAS M 2 PFOA and M 4 PFOS were able to predict the mass transfer coefficients of the studied PFAS analytes. In contrast, the mass transfer coefficients were underpredicted by Br − and M 3 PFPeA. For validation, the PC-based passive samplers consisting of these four PRCs, as well as two other PRCs ( i.e. , M 8 PFOA and C 8 H 17 SO 3 − ), were deployed in the sediment and water at a PFAS-impacted field site. The concentration-time profiles of the PRCs indicated that the samplers deployed in the sediment required at least 6 to 7 weeks to reach 90% equilibrium. If the deployment times are shorter ( e.g. , 2 to 4 weeks), PFAS concentrations at equilibrium could be estimated based on the concentrations of the PRCs remaining in the sampler at retrieval. All PFAS concentrations determined via this approach were within a factor of two compared to those measured in the mechanically extracted sediment pore water and surface water samples obtained adjacent to the sampler deployment locations. Neither biofouling of the rate-limiting barrier nor any physical change to it was observed on the sampler after retrieval. The passive sampler developed in this study could be a promising tool for the monitoring of PFAS in pore water and surface water. A simple equilibrium passive sampler, consisting of water in an inert container capped with a rate-limiting barrier, for the monitoring of PFAS in sediment pore water and surface water was developed and tested through a series of laboratory and field experiments.