Hydrothermal oxidation improves corrosion and wear properties of multi-arc ion plated titanium nitride coating for biological application

• Published in: Vacuum Vol. 198; p. 110871
• Main Authors: Bai, Xuehan, Xu, Lingli, Shi, Xingling, Ren, Jian, Xu, Lin, Wang, Qingliang, Li, Boxuan, Liu, Zhenguang, Zheng, Chuanbo, Fu, Qingshan
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.04.2022
• Subjects: Anatase nanoparticle; Corrosion; Hydrothermal; Oxidation; Titanium nitride; Wear; Anatase nanoparticle; Titanium nitride; Oxidation; Corrosion; Hydrothermal; Wear
• ISSN: 0042-207X; 1879-2715
• DOI: 10.1016/j.vacuum.2022.110871

Surface oxidation is found to improve the osseointegration of titanium nitride (TiN) coatings on implantable titanium devices; nevertheless, systematic studies on effects of oxidation are still needed. In this study, multi-arc ion plated (MAIP) titanium nitride (TiN) coating was hydrothermally oxidized in pure water and then the structural, corrosion and wear properties of the coating were studied. A dense oxide layer of 20–50 nm in thickness is formed on TiN after hydrothermal oxidation above 200 °C. The layer is composed of flat anatase particles with a length of 50–150 nm and smaller anatase nanocrystallines located on their surface. The passivation behavior of TiN becomes much stronger in simulated saliva after oxidation treatment, showing a wider passivation range, a lower corrosion current and greatly improved impedance. In addition, the open circuit potential (OCP) of oxidized TiN remains much higher than that of untreated after 50 days of immersion. Sliding friction experiments against zirconia (ZrO2) ceramic balls show that the wear type for the untreated TiN coating involves severe plowing and deformation. In contrast, only slight plowing is found on the surface of TiN covered with a compact anatase layer; the friction coefficient decreases sharply and the wear loss decreases obviously. [Display omitted] 1.Anatase nanolayer forms on TiN coating after hydrothermal oxidation in water.2.Hydrothermal oxidation improves corrosion resistance of TiN in artificial saliva.3.Anatase nanolayer contributes to obvious lubrication and wear reduction.