Effect of TiO2 nano-ceramic particles on microstructure and mechanical properties of Al0.4CoCrFe2Ni2 high-entropy alloy

• Published in: China foundry Vol. 19; no. 6; pp. 528 - 534
• Main Authors: Qi, Hao, Li, Guang-long, Zhang, Wei, Lü, Qing-yao, Li, Rong-de, Xie, Si-chen, Shi, Yu, Yu, Bo, Chen, Rui-run, Qu, Ying-dong
• Format: Journal Article
• Language: English
• Published: Singapore Springer Nature Singapore 01.11.2022; School of Materials Science and Engineering,Shenyang University of Technology,Shenyang 110870,China%State Key Laboratory of Light Alloy Casting Technology for High-end Equipment,Shenyang Research Institute of Foundry Co.,Ltd.,Shenyang 110022,China%School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China
• Subjects: Engineering; Machines; Manufacturing; Materials Engineering; Metallic Materials; Processes; Research & Development; A; high-entropy alloy; microstructure; nano-ceramic particles; mechanical property; TiO; TG146.21; TiO2 nano-ceramic particles
• ISSN: 1672-6421; 2365-9459
• DOI: 10.1007/s41230-022-2124-9

Al 0.4 CoCrFe 2 Ni 2 high-entropy alloys with different additions of TiO 2 nano-ceramic particles (0, 1.25vol.%, 2.5vol.%, 3.75vol.% and 5vol.%, respectively) were prepared by using the vacuum arc melting method. The effects of TiO 2 addition on the crystal structure, microstructures and mechanical properties of the alloy were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and tensile testing. The microstructure analysis shows that the TiO 2 nano-ceramic particles added in the alloy are decomposed, and a small amount of Al 2 O 3 and a great number of intermetallic compounds (γ′ phases) with simple cube structure are formed. The γ′ phases are enriched at inter-dendrite, which increases the resistance of dislocation movement during the deformation of the alloy, thus balancing the problem of high plasticity and low strength of the alloy. When the addition of TiO 2 is 2.5vol.%, the strength of the high-entropy alloy reaches the maximum of 489 MPa, which is 11.1% higher than the matrix alloy composed of single FCC phase.