Microplastics in Combined Sewer Overflows: An Experimental Study

• Published in: Journal of marine science and engineering Vol. 9; no. 12; p. 1415
• Main Authors: Di Nunno, Fabio, Granata, Francesco, Parrino, Francesco, Gargano, Rudy, de Marinis, Giovanni
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.12.2021
• Subjects: Combined sewer overflows; Control equipment; Dimensional analysis; Diversion structures; Empirical equations; Environmental impact; environmental pollution; Evaluation; Experimental methods; Fibers; Flow control; Flow rates; Flow velocity; Inertia; Microplastics; Outflow; Plastic pollution; Polymers; side weir; Surface water; Water; water bodies; Water flow; Water treatment; Weirs; Baltic Sea
• ISSN: 2077-1312; 2077-1312
• DOI: 10.3390/jmse9121415

One of the main sources of microplastics inside surface waters is represented by combined sewer overflows (CSOs), involving severe risks for the environment. The entry of microplastics into water bodies also depends on the characteristics of sewer diversion structures used as flow control devices. In this work, an experimental investigation was carried out to evaluate the outflow of microplastic particles, consisting of different types of nylon fibers, from a side weir located on a channel with a rectangular section. A specific methodology was developed for the fiber sampling and outflow assessment after the tests were performed. For the tested configurations, an increase in fibers discharged up to 196.15% was measured as the water flow rate increased by 62.75%, combined with an increase in the side weir length up to 40% and a decrease in the crest height up to 20%. The size and weight of the different fibers showed a low impact due to their low inertia, and their motion was governed by the water flow. An empirical equation to evaluate the fiber outflow as a function of water flow rate and side weir geometric characteristics was also proposed and calibrated for the experimentally tested ranges of the dimensionless lateral water outflow Q* = 0.51–0.83 and of the dimensionless geometric parameter S* = 0.114–0.200. These first experimental results make it possible to carry out a preliminary assessment of the impact of CSOs in terms of microplastics spilled into water bodies.