A Basic Experimental Study on Analysis of Leak Signal and Monitoring Method for Water Supply Pipe

• Published in: Applied sciences Vol. 11; no. 5; p. 2097
• Main Authors: Kim, Youngseok, Jung, Haewook, Ryou, Jaesuk, Choi, Jaehyuk
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.03.2021
• Subjects: Accelerometers; Acoustics; Aging; Environmental monitoring; FFT analysis; Finite element analysis; Finite element method; Fourier transforms; Leak detection; Leakage; Leaks; Loosening; Methods; monitoring; Municipal water supplies; Pipes; Sensors; Signal monitoring; smart sensor; Software; Sound; Strain gauges; Strength testing; Tensile strength; Tensile stress; Valves; Water conveyance; Water shortages; Water supply; Water supply systems
• ISSN: 2076-3417; 2076-3417
• DOI: 10.3390/app11052097

Water supply systems are essential elements for human life and industry, and water leaks and water supply cut-off may cause major problems. Local water leaks and pipe failures in the water supply system are inevitable problems due to the aging of pipes. Therefore, leakage detection and prevention are required to monitor the integrity of the water supply system. This paper is a fundamental study on the applicability of the smart bolt, which was developed as a monitoring system to detect water leakage in water supply monitoring. Detection experiments were conducted using a smart bolt with a built-in strain sensor and an accelerometer. Through finite element analysis using ANSYS 2019 R2 and tensile strength testing, the strength of the smart bolt was confirmed to have the acceptable tensile strength. The smart bolt used in this study was verified to meet the allowable criteria of torque and tensile stress for a municipal water supply system. The frequency responses of the simulated leakage pipe system, according to the leakage of the valve and the main pipe, were analyzed, and a leak signal at the valve leak point was detected in the 60-Hz band. The main pipe leaking point was observed to produce a leak signal with a much higher-order mode than that of the valve leak point. Therefore, the smart bolt can be applied to detect warning leak signs from water supply valves and to monitor for loosening of the bolts.