Effects of Fe, Si, Cu, and TiB2 Grain Refiner Amounts on the Hot Tearing Susceptibility of 5083, 6061, and 7075 Aluminum Ingots

• Published in: Metals (Basel ) Vol. 14; no. 1; p. 15
• Main Authors: Liang, Kai-Yu, Huang, Hao-Chuan, Tseng, Ching-Yao, Chen, Mien-Chung, Lee, Sheng-Long, Lin, Chi-Cheng, Su, Te-Cheng
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.01.2024
• Subjects: Alloying elements; Alloys; Aluminum alloys; Aluminum base alloys; CALPHAD; Casting; Casting defects; Chill casting; constrained rod casting method; Copper; Crack initiation; Crystal defects; Crystal structure; Direct chill casting; Energy consumption; Equilibrium; feeding mechanism; Fracture mechanics; Grain refinement; hot tearing susceptibility; Ingot casting; Intermetallic compounds; Magnesium compounds; Manganese; Metal silicides; Morphology; Nucleation; Phase diagrams; Silicon; Solidification; Solids; Tearing; Titanium diboride; Trends
• ISSN: 2075-4701; 2075-4701
• DOI: 10.3390/met14010015

Aluminum alloys 5083, 6061, and 7075 are prone to hot tearing under direct-chill casting conditions; the defects that form during solidification of those alloys are highly sensitive to variation in the alloying elements, with these elements commonly being Si, Fe, Cu, and Ti. This study investigates the influence of the morphology, content, and size of intermetallic compounds on the hot tearing behavior of the 5083, 6061, and 7075 aluminum alloys by combining a constrained rod casting technique, phase diagram calculation, and multiscale microstructural characterizations. The fishbone-shaped α-Al15(Fe,Mn)3Si2 in 5083 can serve as a path for crack nucleation and growth, and an increase in Si content results in Mg2Si assuming fishbone morphology, thereby increasing hot tearing susceptibility. The amount of plate-like β-Al5FeSi is the primary factor controlling the hot tearing susceptibility of 6061. For 7075, increasing the Cu content can greatly enhance the remaining liquid fraction, feeding, and hot tearing susceptibility. For all three alloys, TiB2 grain refiner minimizes hot tearing. This study elucidates the influences of the amounts of Fe, Si, Cu, and TiB2 grain refiner on hot tearing susceptibility. The findings can help establish compositional control standards for the 5083, 6061, and 7075 aluminum alloy series, particularly when the recycling rate must be increased.