Mining Wastes of an Albite Deposit as Raw Materials for Vitrified Mullite Ceramics

• Published in: Minerals (Basel) Vol. 11; no. 3; p. 232
• Main Authors: Sánchez-Soto, Pedro J., Garzón, Eduardo, Pérez-Villarejo, Luis, Angelopoulos, George N., Eliche-Quesada, Dolores
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.03.2021
• Subjects: albite; Aluminum oxide; Bulk density; Ceramics; Cost control; Crystals; Differential thermal analysis; Differential thermogravimetric analysis; Dilatometry; Electron microscopy; Fluorescence; Industrial wastes; Kaolinite; Laboratories; Mine wastes; Mineralogy; Minerals; Mining; Mullite; Particle size; Phase diagrams; Porosity; Properties; Quartz; Raw materials; Scanning electron microscopy; Silica; Silicon dioxide; Temperature; Temperature effects; Thermal analysis; vitrified; waste mining; Wastes; Water absorption; X ray fluorescence analysis; X rays; X-ray diffraction; X-ray fluorescence; Germany
• ISSN: 2075-163X; 2075-163X
• DOI: 10.3390/min11030232

In this work, an examination of mining wastes of an albite deposit in south Spain was carried out using X-ray Fluorescence (XRF), X-ray diffraction (XRD), particle size analysis, thermo-dilatometry and Differential Thermal Analysis (DTA) and Thermogravimetric (TG) analysis, followed by the determination of the main ceramic properties. The albite content in two selected samples was high (65–40 wt. %), accompanied by quartz (25–40 wt. %) and other minor minerals identified by XRD, mainly kaolinite, in agreement with the high content of silica and alumina determined by XRF. The content of Na2O was in the range 5.44–3.09 wt. %, being associated with albite. The iron content was very low (<0.75 wt. %). The kaolinite content in the waste was estimated from ~8 to 32 wt. %. The particle size analysis indicated values of 11–31 wt. % of particles <63 µm. The ceramic properties of fired samples (1000–1350 °C) showed progressive shrinkage by the thermal effect, with water absorption and open porosity almost at zero at 1200–1250 °C. At 1200 °C, the bulk density reached a maximum value of 2.38 g/cm3. An abrupt change in the phase evolution by XRD was found from 1150 to 1200 °C, with the disappearance of albite by melting in accordance with the predictions of the phase diagram SiO2-Al2O3-Na2O and the system albite-quartz. These fired materials contained as main crystalline phases quartz and mullite. Quartz was present in the raw samples and mullite was formed by decomposition of kaolinite. The observation of mullite forming needle-shape crystals was revealed by Scanning Electron Microscopy (SEM). The formation of fully densified and vitrified mullite materials by firing treatments was demonstrated.