Simulations and experiments of laminar heat transfer for Therminol heat transfer fluids in a rifled tube

• Published in: Applied thermal engineering Vol. 102; pp. 861 - 872
• Main Authors: Xu, Weiguo, Ren, Depeng, Ye, Qing, Liu, Guodong, Lu, Huilin, Wang, Shuai
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 05.06.2016
• Subjects: Computational fluid dynamics; Convective heat transfer; Experiment; Fluid flow; Fluids; Heat transfer; Laminar flow; Mathematical models; Rifled tube; Simulations; Tubes; Turbulence; Turbulent flow; Convective heat transfer; Simulations; Laminar flow; Experiment; Rifled tube
• ISSN: 1359-4311
• DOI: 10.1016/j.applthermaleng.2016.04.011

Predicted laminar Nusselt number using regression correlation of Therminol-55 heat transfer fluid is in agreement with experiments in the rifled tube. [Display omitted] •Heat transfer coefficient and friction factor are measured and predicted in the rifled tube.•Correlations for Nusselt number and friction factor are proposed.•The roughness height of 0.425mm in transition SST model is suggested as an input parameter.•k–kl–ω transition and transition SST models are recommended for laminar–turbulent transition.•Thermal enhancement factor and synergy angle are predicted in the rifled tube. Simulations and experiments of flow and heat transfer behavior of Therminol-55 heat transfer fluid have been conducted in a horizontal rifled tube with outer diameter and inner diameter 25.0 and 20.0mm, pitch and rib height of 12.0 and 1.0mm, respectively. Numerical simulations of three-dimensional flow behavior of Therminol-55 heat transfer fluid are carried out using FLUENT code in the rifled tube. Experimental results show that the heat transfer and thermal performance of Therminol-55 heat transfer fluid in the rifled tube are considerably improved compared to those of the smooth tube. The Nusselt number increases with the increase of Reynolds number, and is from 3.5 to 5.1 times over the smooth tube. Also, the pressure drop results reveal that the average friction factor of the ribbed tube is in a range of 2.2 and 4.2 times over the smooth tube. Predictive Nusselt number and friction factor correlations have been presented. The numerical results show that the laminar flow model is valid only at lower Reynolds number in the developed laminar flow of rifled tube. The k–kl–ω transition model and transition SST model with roughness of 0.425mm are recommended for the predictions of transition process from laminar to turbulent flow in the rifled tube.