Raman analysis of DLC coated engine components with complex shape: Understanding wear mechanisms

• Published in: Thin solid films Vol. 518; no. 5; pp. 1475 - 1479
• Main Authors: Jaoul, C., Jarry, O., Tristant, P., Merle-Méjean, T., Colas, M., Dublanche-Tixier, C., Jacquet, J.-M.
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 31.12.2009; Elsevier
• Subjects: a-C:H films; Diamond-like carbon; Raman spectroscopy; Tribology; Wear; Diamond-like carbon; a-C:H films; Raman spectroscopy; Wear; Tribology; Wear Raman spectroscopy Tribology
• ISSN: 0040-6090; 1879-2731
• DOI: 10.1016/j.tsf.2009.09.110

Hydrogenated amorphous carbon (a-C:H) films were deposited on flat samples and engine components using an industrial scale reactor. Characterization of the coating allowed validating its application on engine parts due to high hardness (32GPa) and high level of adhesion achieved using sublayers. The original approach of this work concerned the use of Raman analysis not only on flat samples after tribometer tests but also directly on coated engine parts with complex shape (like cam/follower system), in order to understand wear mechanisms occurring in motorsport engines. As wear could lead to a coating thickness decrease, a particular attention was paid on the Raman signal of the sublayers. Among the different values extracted from Raman spectrum to characterize structural organization, the value of G peak intensity appeared as a criterion of validity of analyses because it is directly linked to the remaining thickness of the a-C:H layer. For flat samples tested on ball-on-disc tribometer, structure of a-C:H film observed by Raman spectroscopy in the wear track remained stable in depth. Then, a-C:H coated engine components were studied before and after working in real conditions. Two different wear mechanisms were identified. The first one did not show any structural modification of the bulk a-C:H layer. In the second one, the high initial roughness of samples (Rt=1.15µm) lead to coating delaminations after sliding. Massive graphitization which decreases drastically mechanical properties of the coatings was observed by Raman analyses on the contact area. The increase of the temperature on rough edges of the scratches could explain this graphitization.