Simulation of moisture variations in concrete during prolonged alternate wetting and drying cycles using 3D discrete network model

• Published in: Case Studies in Construction Materials Vol. 19; p. e02553
• Main Authors: Waghmare, Dheeraj, Ren, Dawei, Jiradilok, Punyawut, Nagai, Kohei
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.12.2023; Elsevier
• Subjects: Capillary action; Diffusion; Discrete element method; Mass transport; Meso-scale; Moisture profiles; Wetting and drying; Capillary action; Wetting and drying; Moisture profiles; Mass transport; Discrete element method; Diffusion; Meso-scale
• ISSN: 2214-5095; 2214-5095
• DOI: 10.1016/j.cscm.2023.e02553

The precise prediction of moisture variations within concrete is of great significance because various deterioration phenomena spanning corrosion to carbonation are induced by mass transfer facilitated by the presence of moisture. Under actual environmental conditions, concrete is exposed to numerous wetting and drying cycles. Thus, to accurately predict moisture variations it is essential to consider the effect of these conditions. This study investigates the effect of alternate wetting and drying cycles on moisture penetration through concrete at the mesoscale using a 3D discrete network model based on a Rigid Body Spring Model (RBSM). For modeling moisture transport during wetting, the non-linear diffusion equation is used and the effects of capillary suction in moisture transport are also considered. On the other hand, moisture transport during drying is modeled as an evaporation-diffusion process. The simulation results obtained using this discrete network model are validated against the available experimental outcomes. During the wetting cycle, the moisture content in regions close to the exposed surface rapidly increases and approaches the maximum saturation. The effect of subsequent drying is seen only until a certain depth below the exposed surface, known as the influential depth. It is also observed that moisture continues to penetrate deeper into a specimen even during a drying cycle.