Thermal Performance of Microencapsulated Phase Change Material (mPCM) in Roof Modules during Daily Operation

• Published in: Energies (Basel) Vol. 11; no. 3; p. 679
• Main Authors: Zhou, Qi, Liu, Pin-Feng, Tzeng, Chun-Ta, Lai, Chi-Ming
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.03.2018
• Subjects: building materials; heat transfer; microencapsulated phase change material (mPCM); phase change material (PCM); roof; Thermal energy; thermal performance
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en11030679

This study combines microencapsulated phase change materials (mPCMs) (core material: paraffin; melting points: 37 and 43 °C) and aluminum honeycomb boards (8 mm core cell) to form mPCM roof modules and investigates their heat absorption and release performances, as well as their impact on indoor heat gain by conducting experiments over a 24-h period, subject to representative weather. The outdoor boundary conditions of the module are hourly sunlight and nighttime natural cooling; on the indoor side of the module, the conditions are daytime air conditioning and nighttime natural cooling. The results indicate that compared to a roof module with a 43 °C melting point mPCM, the roof module with a 37 °C melting point mPCM had improved peak load-shifting capacity, but had a slightly increased indoor heat gain. The mPCMs in both roof modules were successfully cooled during the night, returning to their initial state, to begin a new thermal cycle the next day.