Influence of Cryogenic Treatment on Wear Resistance and Microstructure of AISI A8 Tool Steel

• Published in: Metals (Basel ) Vol. 8; no. 12; p. 1038
• Main Authors: Jimbert, Pello, Iturrondobeitia, Maider, Ibarretxe, Julen, Fernandez-Martinez, Roberto
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.12.2018
• Subjects: AISI A8; carbide distribution; Carbides; Cold work tool steels; Corrosion resistance; Cryogenic effects; Cryogenic engineering; Cryogenic treatment; internal stress; Laboratories; Mechanical properties; Microstructure; Residual stress; Scanning electron microscopy; Software; Steel alloys; Tool wear; wear; Wear rate; Wear resistance; United States > US
• ISSN: 2075-4701; 2075-4701
• DOI: 10.3390/met8121038

The effects of deep cryogenic treatment (DCT) on the wear behavior of different tool steels have been widely reported in the scientific literature with uneven results. Some tool steels show a significant improvement in their wear resistance when they have been cryogenically treated while others exhibit no relevant amelioration or even a reduction in their wear resistance. In this study, the influence of DCT was investigated for a grade that has been barely studied in the scientific literature, the AISI A8 air-hardening medium-alloy cold work tool steel. Several aspects were analyzed in the present work: the wear resistance of the alloy, the internal residual stress, and finally the secondary carbide precipitation in terms of lengths and occupied area and its distribution into the microstructure. The results revealed a reduction in the wear rate of about 14% when the AISI A8 was cryogenically treated before tempering. The number of carbides that precipitated into the microstructure was 6% higher for the cryogenically treated samples, increasing from 0.68% to 0.73% of the total area they covered. Furthermore, the distribution of the carbides into the microstructure was more homogenous for the cryogenically treated samples.