Additively Manufactured Porous Filling Pneumatic Network Actuator

• Published in: Actuators Vol. 12; no. 11; p. 414
• Main Authors: Giacoppo, Giuliano A., Hötzel, Julia, Pott, Peter P.
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.11.2023
• Subjects: 3D printing; Actuators; Additive manufacturing; Airtightness; Automation; Chambers; Compressed air; Deflection; Deformation; Energy; Freeformer; Manufacturing; Mathematical analysis; Mathematical models; Mechanical properties; Membranes; pneumatic actuators; PneuNet; Research projects; Robotics; soft robotics; Three dimensional printing; Germany
• ISSN: 2076-0825; 2076-0825
• DOI: 10.3390/act12110414

This research project investigated the additive manufacturing of pneumatic actuators based on the principle of droplet dosing using an Arburg Freeformer 300-3X 3D printer. The developed structure consists of a porous inner filling and a dense, airtight chamber. By selectively varying the filling densities of the porous inner filling, different membrane deflections of the actuator were achieved. By linking the actuators, a pneumatic network actuator was developed that could be used in endorobotics. To describe the membrane deflection of an additively manufactured pneumatic actuator, a mathematical model was developed that takes into account the influence of additive manufacturing and porous filling. Using a dedicated test rig, the predicted behavior of the pneumatic actuators was shown to be qualitatively consistent. In addition, a pneumatic network actuator (PneuNet) with a diameter of 17 mm and a height of 76 mm, consisting of nine chambers with different filling densities, could be bent through 82° under a pressure of 8 bar. Our study shows that the variation of filling densities during production leads to different membrane deflections. The mathematical model developed provides satisfactory predictions, although the influence of additive manufacturing needs to be determined experimentally. Post-processing is still a necessary step to realize the full bending potential of these actuators, although challenges regarding air-tightness remain. Future research approaches include studying the deflection behavior of the chambers in multiple directions, investigating alternative materials, and optimizing the printing process to improve mechanical properties and reliability.