Comparing Occlusive Balloon Performance Using 3-Dimensional Printed Models of Intracranial Aneurysmal Defects

• Published in: World neurosurgery Vol. 146; pp. e888 - e895
• Main Authors: Knox, Joseph, Sincic, Ryan, McCoy, David B., Sostarich, Colby, Cooke, Daniel L.
• Format: Journal Article
• Language: English
• Published: United States Elsevier Inc 01.02.2021
• Subjects: 3D-printing; Brain aneurysm; Microcatheters; Occlusion balloons; 3D; 3D-printing; ANOVA; Brain aneurysm; IA; Occlusion balloons; BTO; Microcatheters
• ISSN: 1878-8750; 1878-8769
• DOI: 10.1016/j.wneu.2020.11.030

Balloon remodeling microcatheters are essential in assisting endovascular coiling of brain aneurysms, but the performance and pressure requirements of different balloon types when used in aneurysmal defects are currently unknown. We used Tinkercad (Autodesk, Montreal, Quebec) to create model vessels with aneurysmal defects and 3-dimensionally printed these designs with polylactic acid using the Ultimaker2 (Ultimaker, Geldermalsen, Netherlands). We constructed a pressurized box capable of reaching physiologic pressures that housed our vessels and then tested compliant remodeling balloons under fluoroscopy from 3 manufacturers: Hyperglide (Medtronic, Minneapolis, Minnesota, USA), Transform (Stryker Neurovascular, Fremont, California, USA), and Scepter C (Microvention, Tustin, California, USA). Each balloon was inflated to a nominal and supranominal point at each defect, and at each inflation the maximum diameter of the balloon and internal balloon pressure were recorded. The Phillips Intellivue (Phillips, Amsterdam, The Netherlands) monitor was adapted for internal balloon pressure monitoring. A multivariate linear regression analysis was performed to model balloon compliance (balloon diameter divided by pressure). Multivariate regression modeling demonstrated the Scepter balloon had significantly greater compliance compared with both the Hyperglide and Transform balloons (P < 0.001). In addition, we found that Scepter balloons had higher compliance in larger defects compared with the other types of balloons and performance differences based on vessel size. Scepter balloons require less pressure compared with their counterparts to adequately deform through model defects, specifically in larger aneurysm necks in smaller vessel diameters. This result could inform operators of optimal balloon type and size when trying to minimize balloon pressure in fragile brain aneurysms.