Material-enabled damage inspection of multifunctional shape memory alloy tufted composite T-joints

• Published in: NDT & E international : independent nondestructive testing and evaluation Vol. 142; p. 103002
• Main Authors: Khor, WeeLiam, Ravindran, Anil R., Ladani, Raj B., Limprapuwiwattana, Manatsawee, Whitton, Pete, Meeks, Charlotte, Foreman, Andrew D., Ciampa, Francesco
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.03.2024
• Subjects: Damage detection; DIC; Material enabled thermography; Shape memory alloys; NCF; ΔT; Shape memory alloys; Damage detection; Th; t; Material enabled thermography; SMA; Ri; T0; R0; DIC
• ISSN: 0963-8695; 1879-1174
• DOI: 10.1016/j.ndteint.2023.103002

The through-the-thickness reinforcement of carbon-epoxy composite joints with shape memory alloy (SMA) tufts has shown significant improvement of the mechanical strength, fracture toughness, and delamination resistance. This study explores the thermal-electric properties of SMA filaments tufted in composite T-joints to exhibit multiple functionalities including material-enabled thermographic inspection and structural health monitoring via in-situ strain sensing. Infrared thermography image analysis was performed on both pristine and damaged T-joint specimens subject to pull-off testing. Experimental results showed that the heat generated by SMA tufts measured by an infrared camera provided accurate indication of delamination perpendicular to the tuft direction. SMA tufts were also used as strain sensors embedded within the T-joint. Local changes of the electrical resistance in SMA filaments, both separately and within the joint, were observed during pulling loads. Digital Image Correlation measurements exhibited good correlation between electrical resistance variations and the opening of delamination. These results pave the way for the development of multifunctional composite joining systems combining enhanced through-the-thickness damage tolerance and self-sensing capabilities.